Haier FCE-102BCN2A [6/16] Unit installation

Похожие устройства

Unit Installation Installation Acceptance Inspection Each fan coil unit is packaged in corrugated cartons to avoid damages during transportation handling and site placement To make sure no damages occurred due to transportation please follow below steps to check upon receiving the equipment 1 Before acceptance please check if each unit shows any abnormal facts if carton edges and corners are in good conditions and if there re obvious carton damages 2 For any obvious carton damages please immediately unpack to inspect the unit itself If the unit is indeed damaged please indicate on the receipt and refuse to accept Please also check accessories 3 Check hidden damages of the unit 4 If any hidden damage is found do not move the unit on the site The receiver has the obligation to evidence such damage does not occur after delivery Meanwhile please stop unloading and take photos for reference 5 If damages are found please notify the carrier and request the carrier and the receiver to conduct a joint inspection 6 Do not repair it yourself before inspection and confirmation by the carrier representative has been made After confirmation of damages please contact related persons for replacement Installation Precautions To ensure good installation and operation do check the following items before installation of the unit 1 Adequate space shall be provided for installation and maintenance of the unit Please refer to Unit Overall Dimensions and Weight Removable ceiling panels or accesses shall be provided for daily maintenance 2 Determine locations of pipelines and electric wires before installation 3 Make sure hanging structure adequate to support the unit weight 4 All units shall be leveled to ensure smooth water drain and proper operation 5 The unit connecting air duct shall be within the external static pressure scope 6 Thermal insulation of chilled water valves and pipelines shall be made by the installer Installation Installation of fan coil units shall refer to Unit Overall Dimensions and Weight With mounting holes on the top the unit can be hung under the slab by the hanging rods Please install according to the following steps l The installer installs hanging rods or other hanging devices 2 Assemble upper nut and washer to avoid unit vibrating during operation 3 Insert hanging rods into mounting holes of the unit 5

Скачать