Home
Главная
Brayer
Кофеварка
BR1103
Инструкция по эксплуатации Страница: 8

Brayer BR1103 Инструкция по эксплуатации онлайн [8/52] 625015

• After making co󰀨ee set the operation mode switch (7)

to the position « » to switch the co󰀨ee maker o󰀨,

and the indicator (8) will go out.

• Pour the ready co󰀨ee into cups.

• Remove the lter holder (5) by turning it clockwise,

wash the lter (6). Use the lter retainer (4) to avoid

the lter (6) dropping.

• Control the tray (1) lling, when the tray (1) is full,

remove the grid (2) and the tray (1), pour the liquid out

of the tray (1). Wash the tray (1) and the grid (2), dry

them and install the tray (1) and the grid (2) back to

their places.

MAKING CAPPUCCINO

Attention! When making cappuccino be careful to avoid

getting burns by outgoing hot steam.

• Make co󰀨ee, as described in the chapter «MAKING

ESPRESSO», pour co󰀨ee in the cup with enough

capacity to add frothed milk.

• Milk for making foam must be cold, fresh and without

additives. Use whole milk with fat content from 4%

to 6%, the cream fat content should be not less than

10%.

• Set the operation mode switch (7) to the position «

» to switch the co󰀨ee maker o󰀨 and release the

pressure, then unplug the unit.

• Remove the water tank lid (9) turning it

counterclockwise and pour some water into the tank

• Make sure that the power plug is not inserted into the

mains socket, and the operation mode switch (7) is

set to the position «

».

• Remove the water tank lid (9) turning it

counterclockwise and ll the water tank, using the

ask (14). Do not exceed the maximal capacity of the

water tank.

Note: there are water level marks on the ask (14), the

maximal level mark is for 4 cups of co󰀨ee, the minimal

mark is for 2 cups of co󰀨ee.

• Install the lid (9) back to its place and thread it

rotating clockwise.

• Put the lter (6) into the holder (5), add ground co󰀨ee

into the lter (6) with the measuring spoon (15).

Note: there are marks on the lter (6) for the amount of

ground co󰀨ee for making 2 or 4 cups of co󰀨ee. Add the

required amount of ground co󰀨ee into the lter (6).

• Set the lter holder (5) to the position «

», the lter

holder (5) ledges should match the grooves in the

boiler. Turn the lter holder (5) counterclockwise to

the position «

» (pic. 1).

• Place the ask (14) on the grid (2).

• Insert the power plug into the mains socket.

• Set the operation mode switch (7) to the position «

brew

», the light indicator (8) will light up, the heating

element will switch on and the ready co󰀨ee will start

pouring into the ask (14).

Brayer BR1103 Инструкция по эксплуатации онлайн [8/52] 625015

Содержание

Похожие устройства