Harper HTP-5T01 [12/38] Troubleshooting

Содержание

HOME TROUBLESHOOTING Malfunctions Probable causes Methods of elimination White sediment or scale inside the thermopot Using hard water Clean the thermopot from scale Use the re boiling function to get rid of the odor Unpleasant odor Chlorinated water may have an unpleasant smell after boiling When using the device on a plastic surface the smell of plastic can get into the water through the pump The filter is blocked Clean the filter with a brush Air bubbles in the pump Open and close the lid and try again The pump is blocked Click the unlock button The socket is faulty Check for voltage in the outlet The power cord is not connected Connect the cord Hot water flows out spontaneously The water level is above the maximum mark Drain the water below the maximum mark The external surface of the device is very hot During operation of the device its surface may heat up to 65 C if the room temperature is high This is not a malfunction Error E1 Damage to the thermistor circuit Contact the service center Error E2 Short circuit of the thermistor circuit Contact the service center Error E3 The overheating protection has been activated Contact the service center The water supply does not work immediately after boiling The water supply does not work The device does not turn on 12 HARPER