Webasto Thermo Top Evo Start B (Бензин) [2/4] Operation of the heater

The heater must not:

• be exposed to temperatures of more than 120 °C (storage

temperature), otherwise the electronics may suffer perma-

nent damage.

• be operated without at least 20 % brand name anti-freeze

in the water of the heating circuit.

The heater:

• may only be operated with the fuel specified on the rating

plate and at the nominal voltage specified on the rating

plate.

• must be taken out of operation by switching it off immedi-

ately and removing the fuse if smoke develops, if unusual

burning noises are heard or if there is a smell of fuel.

The heater must not be restarted until the unit has been

checked exclusively by personnel duly trained by Webasto.

• must be operated for 10 minutes at least once a year, with

the engine cold and the fan set to the minimum setting.

• must be inspected every 2 years by a specialist at the begin-

ning of the heating season or earlier.

Liability:

• Non-compliance with the operating instructions and the

warnings contained therein will lead to the exclusion of all

liability by Webasto. The same also applies if repairs are not

undertaken by professionals or without using genuine spare

parts. This invalidates the type approval for the heater and

its homologation/EC type permit.

Normal operation

The heater can be started via the heater control, depending on its configuration. Before park-

ing the vehicle, the settings required for the model must be carried out (temperature, fan).

Note:

We recommend that the heating time be set in accordance with the driving time.

Heating time = driving time

Example: For a journey lasting approx. 20 minutes (one way), the duty period should

not exceed 20 minutes.

Operation of the heater