![Citizen CL-E720 [8/16] Loading media for cl s52x 53x 62x 63x cl e720 e730 e720dt](/img/pdf.png)
Citizen CL-E720 [8/16] Loading media for cl s52x 53x 62x 63x cl e720 e730 e720dt
![Citizen CL-S521 [8/16] Loading media for cl s52x 53x 62x 63x cl e720 e730 e720dt](/views2/1842807/page8/bg8.png)
-8-
4. Auto-cutter settings
“Cut On” menu will be selected automatically when the auto-cutter is
installed; thus, the printer can be used without adjustment. However, some
printers may not have the “AutoCongure” function. In this case, select the
“After Print” menu of the menu setup mode, and the “Cut On” menu on the
“Function Select” menu. If the printer has the “AutoCongure” function, the
“AutoCongure” menu will be printed out in front of “Function Select” menu
when you print the “Current Setup”.
Note
See the printer’s User’s Manual (CD-ROM) for details on “Print Menu Settings”.
Loading Media (For CL-S52X/53X/62X/63X/CL-E720/E730/E720DT)
(1) Press the printhead lever, and then open the head unit and sensor arm.
Printhead lever
(2) With scissors, cut the end of the media loaded in the media holder.
(3) Feed the end of the media through the cutter assembly until the end
extends 10 mm past the cutter cover.
(4) Close the head unit and sensor arm.
Approx. 10 mm
(5) The cutter will operate one time when the FEED key is pressed.
Содержание
- User s manual p.1
- Auto cutter p.1
- Contents p.2
- Notice p.3
- Warning p.4
- Safety signsthat must be strictly observed p.4
- Safety signs that must be strictly observed p.4
- Caution p.4
- Caution p.5
- Main specifications of auto cutter p.6
- Function p.6
- Caution p.6
- You should check that all of the following items are inside the accessory box if any are missing please contact your supplier p.7
- Cutter stand unit 1 piece cutter unit 1 piece screws 2 pieces user s manual 1 piece p.7
- Checking items inside the accessory box p.7
- Loading media for cl s52x 53x 62x 63x cl e720 e730 e720dt p.8
- Auto cutter settings p.8
- Loading media for cl s400dt p.9
- Caution p.9
- Cut position p.10
- The following diagram gives the distance from the media sensor and the thermal printhead to the cutter blade p.10
- Software switch setup command stx vn p.11
- Sheet cutting interval command cnn two digit entry method nnnn four digit entry method p.11
- Media cut command stx o p.11
- Cut settings p.11
- Cut position setup command stx fnnn p.11
- Mm 1 0 p.12
- Lc 10 mm 0 9 p.12
- If media with a cut length shorter than the minimum cut length of 25 mm 1 in is used the cut media may remain in the cutter unit and cause paper jams to prevent this when the printer detects a cut length shorter than the minimum it feeds the media without operating the cutter therefore use a cut length of 25 mm 1 in or longer when setting the media cut length p.12
- Auto cut length detection p.12
- User maintenance p.13
- Remove the platen for cl s52x 53x 62x 63x cl e720 e730 e720dt p.13
- Remove the platen for cl s400dt p.14
- Troubleshooting p.15
- Caution p.15
- Back cover p.16
Похожие устройства
-
Citizen CL-E720Command Reference DMX -
Citizen CL-E720Утилита для печати этикеток -
Citizen CL-E720Command Reference ZPL -
Citizen CL-E720Сетевые карты -
Citizen CL-S700Описание системы команд -
Citizen CL-S700Краткая инструкция -
Citizen CL-S700Руководство пользователя -
Citizen CL-S700Брошюра -
Citizen CL-E720Руководство пользователя -
Citizen CL-E720Брошюра -
Epson TM-T20III C31CH51011Руководство по эксплуатации -
Mertech TLP100 Terra Nova 4588Руководство по эксплуатации