Timberk T-WSS80-FS40D-V Инструкция по эксплуатации онлайн [24/60] 635881

Timberk T-WSS80-FS40D-V Инструкция по эксплуатации онлайн [24/60] 635881
IM2021
24
7. Open the shut-off valve of the water main and one of the outlet valves. When the
tank is full, which is prompted by water leaking from the outlet valve, close the outlet
valve and make sure that all connectors are tight.
* not included in the scope of delivery. New hoses must be used, old hoses must not
be reused
WARNING!
Do not operate the water heater without a safety relief valve installed on the inlet
nozzle.
WARNING!
The pressure-relief device must be activated on a regular basis to remove the scale
and ensure proper operation.
WARNING!
A discharge pipe connected to the pressure relief device installed downwards direction
and in a frost-free environment.
NOTE!
No additional accessories, such as a shut-off valve, must be mounted between the
safety relief valve and the inlet nozzle.
WARNING!
If water in the installation place has significant content of calcium, manganese or iron
salts, it is necessary to install a suitable filter in the water supply system in order to
reduce the amount of scale in the tank and on the heating element.
Connection to the electric main
WARNING!
Before connecting the tank water heater, make sure the water heater is properly
grounded. Proper grounding is important to minimize electrocution and fire hazard. The
power cord is equipped with a plug with a grounding contact. The product must be
used with a properly grounded main socket.
WARNING!
Using a water heater without grounding is not safe for your life.
1. The water heater is designed to be connected to a 220-240 V single-phase electric
main. Before connecting, make sure that the power supply at the site of connection
complies with the parameters indicated on the plate with the specifications of the
product. When installing the heater, comply with the applicable electrical safety
precautions.
2. The main socket must be designed for rated current of at least 10A and electric
cable with core cross section of at least 3x1.5 mm
2
(for copper).

Содержание

Похожие устройства

Скачать