Timberk T-EC2000-S1M Инструкция по эксплуатации онлайн [20/32] 635916

IM2022

20

Temperature setting

Turn the thermostat knob fully clockwise. When the room temperature reaches the set level, turn the

thermostat knob counterclockwise until the appliance turns off. Now the thermostat will maintain the set

9. CLEANING AND MAINTENANCE OF THE UNIT

The external body of the device must be regularly cleaned from dust and dirt, because this affects the

efficiency of its work.

Before cleaning, turn off the device and unplug it from the network, let it cool, then wipe its body with a soft,

slightly damp cloth. Then wipe it dry and allow the device to dry completely. It is not recommended to use

detergents, including detergents with abrasive compounds to clean the body of the device. Do not damage

the appliance with sharp objects, because scratches on paint can cause rust.

The rear side of the convector must also be periodically cleaned from dust and dirt. To do this, disconnect

device in a room with a big amount of dust particles and other contaminants in the air.

10. TROUBLESHOOTING

Possible malfunctions and solutions for them are indicated in table 2. If it is impossible to fix these

malfunctions with these methods, contact the authorized service center.

Table 2

Malfunction

Possible cause

Solution

Temperature limiter parted

electrical circuit and shut off

the heating elements

Ensure that the air inlet or

outlet grille is not blocked by

foreign objects and wait for

turning on of the temperature

limiter, after the body of

the device cools down.

Malfunction in circuit breaker

Change the circuit breaker

Defective power relay