70mai Tire Pressure Monitoring System Lite (MidriveT02) [8/18] Using the receiver

Using the Receiver

1. Power On

After installing the receiver, press and hold the power button or plug in the USB cable to power on

the sensors. When powered on, the receiver will give out a “beep” before showing the tire pressure

values on the display. Initially, the display will show “- - “. This is normal. The tire pressure values

will be shown after the car has moved for 3 to 5 minutes. Alternatively, you can turn on the receiver

while installing the sensors at the workshop and the tire pressure and temperature will be

displayed on the receiver during the installation process.

2. Alarm Function

High pressure alarm

When the pressure of any tire is 125% higher than the standard tire pressure at cold state during

any transmission cycle, the receiver will trigger a buzzer alarm and the pressure value for the

affected tire will keep flashing on the display.

The buzzer alarm can be stopped by pressing the power button or when the tire pressure is 0.1

bar lower than the alarm threshold. (Default high pressure alarm threshold: 3.0 bar)

*

Pressure alarm settings should be adjusted for different car models based on the car manual or after consulting a

workshop.

*

Pressure alarm settings should be adjusted for different car models based on the car manual or after consulting a

workshop.

High temperature alarm

When the temperature of any tire exceeds the threshold during any transmission cycle, the

receiver will trigger a buzzer alarm and the temperature value for the affected tire will keep

flashing on the display.

The buzzer alarm can be stopped by pressing the power button or when the tire temperature is 1

℃ lower than the alarm threshold. (Default high temperature alarm threshold: 70 ℃)

off by pressing and holding the power button. When it is turned on with a USB connection, the

receiver will enter sleep mode when the power button is pressed and held.

7