Gorenje VC2303GAPRACY [18/28] Instruction for use
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Gorenje VC2303GAPRACY [18/28] Instruction for use

Gorenje VC2303GAPRACY [18/28] Instruction for use
18
hose base, then pull to remove it from the
attachment point.
ROLLING THE CABLE OUT AND UP
Pull out the cable to such a length that easy
working is ensured. Now connect the appliance
to the main supply. Press the switch to activate
the automatic rewinder and hold on the mains
plug for safety reason.
FITTING TUBE AND ACCESSORIES
• Insert a flexible hose into a telescopic tube.
• Fit a nozzle to telescopic tube:
- Floor brush is intended for cleaning
bare floor and floor coverings.
- Crevice/furniture nozzle is for cleaning
corners and between cushions.
According to the mark rotate the nozzle
to brush position to clean curtain or dust
on the decorating surfaces.
- Turbo brush is appropriate for cleaning
smooth and bare floor (couch, sofa,
carpeting).
- Parquet brush is appropriate for
cleaning sensitive floors and flat
surfaces such as parquet, laminate, tile,
etc. Bristles for efficient cleaning are at
the bottom and over the entire length so
you cannot damage your floor.
Instruction for use
• Before using the appliance, unwind a
sufficient length of cord and insert the plug
into the power supply.
• Press the On/Off button to switch the unit on.
To stop it press the On/Off button again.
• You can adjust the air flow using the air flow
regulator on the flexible hose:
- decrease power for cleaning curtains,
books, furniture, etc.
- increase power for cleaning bare floor.
To rewind the cord, press the rewind button and
guide the cord with hand to ensure that it does
not whip causing damage.
Maintenance
1. Spilling rubbish from the dust
compartment subassembly
• Always operate the cleaner with the dust
compartment subassembly whole installed.
• If you forget to attach and filter or attach its
in the wrong manner, the dust compartment
subassembly may not rinse.
1. After removing the flexible tube, press the
locking buttons to open the cover.
2. Carry the dust compartment subassembly.
3. Carry away the dust-glass cap and Spill
rubbish.
4. Spill rubbish and fix the dust compartment
subassembly.
5. Replace the dust compartment subassembly
until it is locked.
2. CLEANING AND CHANGING
FILTER
• We Filter for air-inlet should be cleaned at
least twice a year or when it becomes
visible solid.
• We suggest to clean filter after every long
use.
• With regular cleaning and maintenance of
filter, you will achieve good results of
cleaning, and hence the longer life of the
appliance.
• To achieve this we recommend the following
cleaning methods:
- Cleaning with brush,
- Shaking the dust from filter,
- Cleaning the dust from with
compressed air.
• Clean filter provides a smooth air flow and
allows optimal suction power.

Содержание

Похожие устройства

Скачать