Marta MT-2073 black jade [5/10] Before the first use

GBR USER MANUAL

CAUTION

 Read this manual carefully before using the appliance and save it for future reference.

 Before the first use, check the device specifications and the power supply in your network.

 It is not intended for industrial use.

 To avoid electric shock and fire, do not immerse in water or other liquids. If this occurs, immediately unplug it and contact service center for inspection.

 This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have

been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

 Be cautious when using blade

 Every time after use, make sure the appliance is turned off, the blades stopped completely. Only then open the lid.

 Do not overload the appliance. The appliance is designed for processing relatively small quantities of food and maximum quantities given in the table should not be exceeded.

 Never blend hot liquids!

 Maximum time of continuous operation - no more than 1 minute with an interval for at least 5 minutes.

BEFORE THE FIRST USE

 Place the cutting blade on the drive spindle and put them into the container.

 Load the food items for chopping into the container.

Note: Never fill the container over the Max mark on scale.

 Place the container lid on top of the container, then place the motor unit.

 Insert the plug into power supply.

 Press the On/ Off button to start chopping. The appliance will run as long as the button is kept pressed.

CAUTION: For most kinds of food, it is advisable to press the On/Off button momentarily a few times in succession and then to continue operating until the required degree of fineness has

been achieved. Do not overload the appliance by putting in too much food and do not operate continuously for more than one minute.