Coolfort CF-2004 [5/8] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Coolfort CF-2004 [5/8] English

Coolfort CF-2004 [5/8] English
5
ENGLISH
axis and fix them with the plastic nut. Hold the
blades and screw the nut counterclockwise.
· Open the clamps on the rear grid (4).
· Install the front grid (1) on the rear grid (4) and
close the clamps.
· The fan is ready for operation.
USAGE
Before using the unit for the first time, make sure that
the voltage in your mains corresponds to operating
voltage of the fan.
· Place the fan on a flat, dry and steady surface.
· Insert the power plug into the mains socket.
· Select the necessary operation mode of the fan by
pressing the buttons «0-1-2-3»:
“0” – Fan is switched off.
“1” – Low air flow speed.
“2” – Medium speed of air flow.
«3» – High air flow speed.
· After the unit operation press the button «0» and
disconnect the power plug (12) from the mains
socket.
OSCILLATION AND TILT FUNCTION 
Press the button (6) to switch the 90° oscillation oper-
ating mode of the fan on. Lift the button (6) by pulling
it upwards to switch the oscillation mode off.
To change the fan slope angle take the motor unit (11)
and tilt it at the required angle. Clicking is normal in
that case.
MAINTENANCE AND CARE
· Before cleaning the fan set the speed mode switch
(13) to the “0” position and unplug the unit.
· Do not immerse the fan, power cord and power
plug into water or any other liquids.
· Make sure that no liquids get into the motor unit
(11) of the fan to avoid its damage and prevent the
risk of electric shock.
· Do not use abrasive cleaners and solvents to clean
the unit.
· Clean the motor unit of the fan with a soft and
slightly damp cloth, then wipe it dry.
· If you need to clean the blades (2) and the grids
(1, 4), disassemble the fan as described in the
chapter ASSEMBLING THE FAN:
– remove the blades (2);
– unscrew the nut (3) and remove the rear grid (4).
· Clean the grids (1, 4) and the blades (2) with a
slightly damp cloth, then wipe them dry.
· Assemble the fan in reverse order.
· Keep the unit in a dry cool place unreachable for
children and people with disabilities.
Storage
– Unplug the fan and clean it.
– If necessary, disassemble the fan in accordance
with the chapter FAN ASSEMBLING;
– Pack the fan into the original package and put it
away for storage in a dry cool place away from
children.
DELIVERY SET
Motor unit – 1 pc.
Support – 1 pc.
Floor base – 1 pc.
Blades – 1 pc.
Front grid – 1 pc.
Rear grid – 1 pc.
Instruction manual – 1 pc.
Warranty certificate – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V ~ 50 Hz
Rated input power: 40 W
Diameter: 43 cm (16,9”)
RECYCLING 
For environment protection do not throw out the unit
and the batteries (if included), do not discard the unit
and the batteries with usual household waste after the
service life expiration; apply to specialized centers for
further recycling.
The waste generated during the disposal of the unit
is subject to mandatory collection and consequent
disposal in the prescribed manner.
For further information about recycling of this prod-
uct apply to a local municipal administration, a dis-
posal service or to the shop where you purchased
this product.
The manufacturer preserves the right to change
design, structure and specifications not affecting
general principles of the unit operation without a
preliminary notification due to which insignificant dif-
ferences between the manual and product may be
observed. If the user reveals such differences, please
report them via e-mail info@coolfort.ru for receipt of
an updated manual.
Unit operating life is not less than 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appliance
was purchased. The bill of sale or receipt must be
produced when making any claim under the terms of
this guarantee.
This product conforms to the EMC Directive
2014/30/EU and to the Low Voltage Directive
2014/35/EU.

Содержание

Похожие устройства

Скачать