Russell Hobbs 26160-56 [4/76] Making coffee

4

BEFORE USING FOR THE FIRST TIME

Fill the reservoir to the max mark, and run the appliance without coee.

FILLING

1. Remove the carafe from the hotplate.

2. Open the lid.

3. Fill the reservoir with the exact amount of water required. Note that the brewing process will use all

of the water that you put in the reservoir.

4. Make sure that the lter holder is pressed down all the way into position. It will click when correctly

SET THE CLOCK

It isn’t neccessary to set the clock to use your coee maker but you will need to set it if you want to use

the timer functions.

1. Put the plug into the power socket.

2. Use the h and min buttons to set the correct time in 24 hour format.

• The clock will retain its settings until the coee maker is unplugged.

COFFEE STRENGTH

brewing a partial carafe of coee (i.e. not completely lling the reservoir). Your coee maker will then alter

the brewing process so your coee will have about the same strength as it would if you had made a full

3. If you want to stop the coee maker while it’s brewing, press the ] button.

4. Once brewed, the hotplate will keep the carafe warm for up to 40 minutes.

USING THE TIMER

Note: Make sure the clock is set to the correct time. Use the h and min buttons.

1. Set the timer to the time you want to start brewing.

a) Press the T button.

b) Use the h and min buttons to set the time you want brewing to start.

If you don’t press either the h or min buttons within 5 seconds, the coee maker will revert to

“normal”, and the current time will show. Press the T button to start again.

2. When the time is programmed, press the ] button. The T button will light up and the T icon will