Whirlpool WSIO 3O34 PFE X Инструкция по эксплуатации онлайн [11/20] 647030

Whirlpool WSIO 3O34 PFE X Инструкция по эксплуатации онлайн [11/20] 647030
11
The appliance must be disconnected from the power
supply before any installation operation - risk of
electrical shock. During installation, make sure the
appliance does not damage the power cable - risk of
re or electrical shock. Only activate the appliance
when the installation has been completed.
If installing the dishwasher at the end of a row of
units making the side panel accessible, the hinge
area must be covered to avoid risk of injury. The
inlet water temperature depends on the dishwasher
model. If the installed inlet hose is marked „25°C
Max”, the maximum allowed water temperature is
25°C. For all other models the maximum allowed
water temperature is 60°C. Do not cut hoses and, in
the case of appliances tted with a waterstop system,
do not immerse the plastic casing containing the inlet
hose in water. If hoses are not long enough, contact
your local dealer. Make sure the inlet and drain hoses
are kink-free and are not crushed. Before using the
appliance for the rst time, check the water inlet and
drain hose for leaks. Make sure that the four feet are
stable and resting on the oor, adjusting them as
required, and check that the dishwasher is perfectly
levelled using a spirit level.
ELECTRICAL WARNINGS
The rating plate is on the edge of the dishwasher
door (visible when the door is open).
It must be possible to disconnect the appliance
from the power supply by unplugging it if plug
is accessible, or by a multi-pole switch installed
upstream of the socket and the appliance must be
earthed, in conformity with national electrical safety
standards.
Do not use extension leads, multiple sockets or
adapters. The electrical components must not be
accessible to the user after installation. Do not use
the appliance when you are wet or barefoot. Do not
operate this appliance if it has a damaged power
cable or plug, if it is not working properly, or if it has
been damaged or dropped.
If the supply cord is damaged, it must be replaced
with an identical one by the manufacturer, its service
agent or similarly qualied persons in order to avoid
a hazard - risk of electrical shock.
If the tted plug is not suitable for your socket outlet,
contact a qualied technician. Do not pull the power
supply cable. Do not immerse the mains cord or plug
in water. Keep the cord away from hot surfaces.
CLEANING AND MAINTENANCE
WARNING: Ensure that the appliance is switched
o󰀨 and disconnected from the power supply before
performing any maintenance operation - risk of elec-
trical shock. Never use steam cleaning equipment.
Do not repair or replace any part of the appliance
unless specically stated in the user manual. Use
only authorized After-sales Service. Self or non-pro-
fessional repair may lead to dangerous incident re-
sulting in live or health threatening and/or signicant
property damage.
DISPOSAL OF PACKAGING MATERIALS
The packaging material is 100% recyclable and
is marked with the recycle symbol . The various
parts of the packaging must therefore be disposed of
responsibly and in full compliance with local authority
regulations governing waste disposal.
DISPOSAL OF HOUSEHOLD APPLIANCES
This appliance is manufactured with recyclable
or reusable materials. Dispose of it in accordance
with local waste disposal regulations. For further
information on the treatment, recovery and recycling
of household electrical appliances, contact your local
authority, the collection service for household waste
or the store where you purchased the appliance. This
appliance is marked in compliance with European
Directive 2012/19/EU, Waste Electrical and Electronic
Equipment (WEEE). By ensuring this product is
disposed of correctly, you will help prevent negative
consequences for the environment and human health.
The symbol on the product or on the accompanying
documentation indicates that it should not be
treated as domestic waste but must be taken to
an appropriate collection center for the recycling of
electrical and electronic equipment.
ENERGY SAVING TIPS
ECO program is suitable to clean normally soiled
tableware, that for this use, it is the most e󰀩cient
program in terms of its combined energy and water
consumption, and that it is used to assess compliance
with the EU Ecodesign legislation.
Loading the household dishwasher up to the capacity
indicated by the manufacturer will contribute to
energy and water savings. The manual pre-rinsing
of tableware items leads to increased water and
energy consumption and is not recommended.
Washing tableware in a household dishwasher
usually consumes less energy and water in the use
phase than hand dishwashing when the household
dishwasher is used according to the manufacturer’s
instructions.

Содержание

Похожие устройства

Скачать