Dreame D9 Pro RLS5-BL0 [7/101] Preparation before use

8 9

1. Remove the protective matter

2. Install the side brush

Click

Preparation Before Use

Note: Install the side brush until it clicks into place.

3. Fasten the damp-proof pad

· It is recommended that the damp-proof pad be fastened on the wooden 󽗊oor.

· If you need to remove the damp-proof pad, please remove it slowly to avoid

adhesive residue.

Select a clean location to place the charging dock. Tear o󽗈 the

adhesive tape at the bottom of the damp-proof pad, and stick the

pad on the ground as shown in the 󽗉gure.

Note:

4. Connect to a power outlet 5. Start recharging

· Keep the immediate area 1.5m in front of the charger and 0.5m to both sides

of the charging dock clear of objects.

· To ensure you can connect to the robot with your phone well, make sure the

robot and charging dock are within WiFi range.

· Do not place the charging dock in an area with direct sunlight or where other

objects might block the signal, as this may hinder the robot from returning to

the charging dock.

Battery Level Indicator

＞ 1.5 m

＞ 0.5 m

Preparation Before Use

Note:

Note: It is recommended to fully charge your robot before 󽗉rst-time use.

Place the charging dock on the level ground against the wall and

connect it to a power outlet.

Place the robot onto the charging dock to recharge. The robot will

turn on automatically and begin recharging.

· White: Battery level is more than 15%

· Orange: Battery level is less than 15%