![Oursson JM4700/RD [9/28] Utilization pic d](/img/pdf.png)
Oursson JM4700/RD [9/28] Utilization pic d
![Oursson JM4700/RD [9/28] Utilization pic d](/views2/1860987/page9/bg9.png)
9
When switching between the «On» and
«Reverse» positions, be sure to move the
button to the «Stop» position for 5 seconds to
stop the auger.
To avoid overheating of the motor, do not use
this device for more than 10 minutes without
a pause. The break between cycles should
be 5 minutes.
Do not place ingredients that are hotter than
80°C into the feeding bowl. Let them cool
down.
Do not use a spoon or other foreign objects
in order to remove the pulp from the pulp
spout as it may damage the device.
To push the ingredients into the feeding chu-
te, use only the pusher, which is included
with the device. It is strictly forbidden to push
ingredients with hands, as this could cause
injury.
ORDER OF OpERATION, Pic.E
1. Assemble the device, Pic. D. Plug in the device.
2. Press the power button, Pic. C-2.
3. Using the pusher, place the prepared ingredients into
the lling hole, Pic. E. The products should be cut
into pieces for the JM4600 model. For the JM4700,
you can use whole or cut ingredients. To place whole
ingredients, remove the lid from the feeding bowl, Pic.
B- 11.
Note:
• Follow the cooking guidelines to prepare the ingre-
dients.
• Do not overll the feeding bowl.
UTILIZATION, Pic. D
Before rst use, wipe the device with a soft, dry cloth.
The rest of the parts wash with warm water and deter-
gent. Before assembling or disassembling the device
and / or removing attachments, make sure that the
device is unplugged.
Step 1, Pic. D-1
Take the lter and place the silicone ring on it, aligning
the tab on the ring with the slot in the lter. Press lightly
on the silicone ring. Make sure the silicone ring is rmly
seated on the lter.
Step 2, Pic. C-3
Place the bowl with spouts on the motor unit. For model
JM4600, align the two marks as shown in the illustration.
For model JM4700, align the juice and pulp spouts with
the grooves on the motor block.
Step 3, Pic. C-4
Insert the auger/pressure screw into the center of the
spout bowl by gently pushing and turning until it snaps
into place.
Step 4, Pic. C-5
Insert the lter into the bowl with the spouts, with the
silicone ring facing down. Note the position of the largest
ridge on the lter. Make sure the dots on the lter and
bowl are aligned as shown in the illustration.
Step 5, Pic. C-6
Place the feeding bowl on the bowl with spouts and turn
it clockwise as shown in the fpicture. Place the lid on the
feeding bowl (for model JM4700).
Note: Always leave the spout lid open when juicing
ingredients that produce a lot of foam, Pic. C-1.
The power button is located on the handle of the device.
The key has three positions (Pic. C-2):
ON () – turn on;
0 – Pause /stop motor;
REV () – Reverse.
Place the pulp container and juice container under
the respective spouts. After completing the assembly,
plug in the device.
4. If a dense mass of ingredients gets stuck in the juicer
mechanism and impedes the movement of the juice,
move the button to the “Stop” position until the engine
comes to a complete stop, then move the button to
the “Reverse” position. The auger will start to rotate
in the opposite direction.After a few seconds, again
move the button to the “Stop” position and after stop-
ping the engine, press “ON”. Repeat this operation if
necessary.
5. At the end of juicing, close the lid at the spout so
that the remaining juice does not drip onto the table.
Switch o the device and unplug it.
Note: Freshly squeezed juices are recommended to
be consumed immediately after preparation, as after
a while they begin to exfoliate and lose their benecial
properties.
pREpARATION REcOMMENDATIONs
1. Do not place into the device dried or hard ingredients,
such as whole grains, fruits with hard seeds, thick-
skinned or ice. This can damage juice maker’s parts.
2. Beans or grain can be used if they were presoaked
overnight and boiled.
3. Do not press the products without juice content (coco-
nut, sugar cane, whole grains, etc.).
4. Do not use ingredients that contain an excessive
amount of vegetable oil or animal fat. Do not use the
juice maker for squeezing oil from the ingredients.
If the plant oil or animal fat falls onto the pressure
screw, it can reduce performance and damage juice
maker’s parts.
5. Do not load pulp into the juice maker. This can lead to
a shutdown or lock the juice cup’s lid.
6. After juicing the ingredients with small seeds, you
must clean all parts of the device from the seeds.
7. The amount of juice depends on the freshness and
juiciness of the products. The fresher the vegetables
or fruit, the more juice you can make.
Содержание
- Jm4600 jm4700 p.1
- Safety instructions pic a p.8
- Recommendations p.8
- Product set pic b p.8
- Elements of design pic c p.8
- Preparation recommendations p.9
- Place the pulp container and juice container under the respective spouts after completing the assembly plug in the device p.9
- Order of operation pic e p.9
- Do not use a spoon or other foreign objects in order to remove the pulp from the pulp spout as it may damage the device p.9
- Do not place ingredients that are hotter than 80 c into the feeding bowl let them cool down p.9
- Utilization pic d p.9
- To push the ingredients into the feeding chu te use only the pusher which is included with the device it is strictly forbidden to push ingredients with hands as this could cause injury p.9
- To avoid overheating of the motor do not use this device for more than 10 minutes without a pause the break between cycles should be 5 minutes p.9
- Possible problems and solutions p.10
- Cleaning and maintenance pic f p.10
- Products should be stored in dry ventilated warehouses at temperatures below 25 c p.11
- Product certification p.11
- For information on product certification see http www oursson com or ask seller for a copy p.11
- Servicing p.12
- Company oursson ag expresses great apprecia p.12
- To avoid misunderstandings we highly rec ommend you to read carefully the instruc tion manual and the warranty obligations check the correctness of the warranty card warranty card is valid only if the following are correctly and clearly stated model se rial number date of purchase clear stamps buyer s signature the serial number and the model of the device must be the same as in the warranty card if these conditions are not fulfilled or the data specified in the warranty card was changed the warranty card is invalid p.13
- Ұсынымдар p.14
- Қауіпсіздік жөніндегі нұсқаулық а сур p.14
- Пайдаланылуы d сур p.15
- Конструкция элементтері c cур p.15
- Жұмыс істеу тәртібі е сур p.15
- Толымдалуы в сур p.15
- Тазалау және күтім көрсету f сур p.16
- Дайындау бойынша ұсынымдар p.16
- Өнімнің сертификатталуы p.17
- Ықтимал ақаулар және оларды жою тәсілдері p.17
- Сәйкестік сертификаты туралы ақпаратты http www oursson com rus ru about partners certificates tab0 сайтынан қараңыз немесе сатушыдан көшірмесін сұраңыз p.17
- Өнім құрғақ желдетілетін бөлмеде кемінде 20 c температурада сақталуы керек p.18
- Сервистік қызмет көрсету p.18
- Рекомендации p.21
- Инструкция по безопасности рис а p.21
- Элементы конструкции рис c p.22
- Порядок работы p.22
- Комплектация p.22
- Использование рис d p.22
- Чистка и уход рис f p.23
- Рекомендации по приготовлению p.23
- Возможные неполадки и способы их устранения p.24
- Условия гарантийных обязательств oursson ag p.25
- Сертификация продукции p.25
- Сервисное обслуживание p.25
- Скачайте мобильное приложение с рецептами к технике oursson p.27
- Forum oursson ru p.27
- 100 8 708 p.27
Похожие устройства
-
Oursson JM4700/SPИнструкция по эксплуатации -
Oursson JM4600/GAИнструкция по эксплуатации -
Oursson JM4600/ORИнструкция по эксплуатации -
Oursson JM6001/DCИнструкция по эксплуатации -
Oursson JM6001/IVИнструкция по эксплуатации -
Oursson JM6001/GAИнструкция по эксплуатации -
Oursson JM6001/RDИнструкция по эксплуатации -
Oursson JM6001/ORИнструкция по эксплуатации -
Oursson JM6001/DСИнструкция по эксплуатации -
Oursson JM6001/GA Зеленая, чернаяИнструкция по эксплуатации
-
Oursson JM6001/IV Бежевая, чернаяИнструкция по эксплуатации
-
Bosch VitaExtract MESM500WИнструкция по эксплуатации