Worx WX742.9 Инструкция по эксплуатации онлайн [12/24] 648940

of dust. Occasionally you may see sparks through the ventilation slots. This is normal

and will not damage your power tool. Store the accessories in a dry place.

Feeding cup maintenance

After use, pour the remaining panting in the feeding cup back into the original painting

bottle. Wipe clean the feeding cup with napkin. If dry painting left, wipe with thinner or

using a brush. If painting remains at the bottom, clean with a cotton bud. Finally, pour in

some thinner or water (depending upon the painting used) and turn on the air brush to

spray a few times to confirm that it is clean.

Spray gun maintenance

(1) Cleansing after short-term use:

Press the on/off switch on the hub to turn on. Pour some detergent or banana oil into

the feeding cup and block the nozzle with napkin. Wait for several minutes until the liquid

in the feeding cup is colorless.

(2) Cleansing after long-term use:

Painting may residue after long-term use. It is recommended to disassemble and clean

the air brush for better performance.

1. Follow the step in Cleansing after short-term use.

2. Pour into the feeding cup with detergent or banana water (detergent is preferred

as banana water is corrosive). Turn on the air brush to spray a few times until the

painting sprayed is colorless.

3. Disassemble the spray gun by loosening the nut. (See Fig. F1, F2) Carefully wipe clean

the needle, feeding cup and the nozzle. Finally, find a soft box to place the needle. Do

not assembly the spray gun immediately.

Next time if the air brush does not work after assembly, the airbrush must be completely

disassembled for cleaning.

4. Ultrasonic cleaning is also workable. Just put the spray gun in the liquid and turn on

the ultrasonic instrument.

ENVIRONMENTAL PROTECTION

Disposal

The machine, its accessories and packaging materials should be sorted for

environmentally friendly recycling.

The plastic components are labeled for categorized recycling.