Viewsonic NMP-570W [10/21] Video output settings

Player IP address

You will also need an IP address for the player on your network. This could be

set automatically (DHCP) or manually (static IP):

DHCP – automatically assign network IP address

DHCP is enabled by default. You do not need to

change the settings unless setting a static IP.

Static IP – manually assign network IP address

Highlight “IP conguration” and press “Enter” on

keyboard to <Select>

Move the highlight to “Static IP” below, press

“Space bar” on the keyboard to ll in the star (*)

at the Static IP brackets, and press “Enter” on the

keyboard to select <OK>.

Proceed to configure an available static IP

address. Select Wireless configuration or IP

conguration as determined by your connection.

Please consult your network administrator for

assistance if necessary.

2.4. Video output settings

For best quality, set the output resolution to match your display’s native

resolution to avoid image scaling and blur.

If you are connecting to an LCD TV, the resolution setting is most likely

1366x768, 1280x720, or 1920x1080. If you are connecting a LCD computer

monitor, projector, or plasma display, refer to the device specications for the

best matching setting.

Press the space bar to fill in the star (*) before pressing the enter key for

<OK>.

2.5. Clock and calendar settings

Set the correct time zone, time, and

date. Daylight Saving (DST) rules

can be congured in Set time zone.