Beko RFSK266T01W [9/48] Appropriate installation location

Содержание

3 Installation 3 1 Appropriate installation location Contact an Authorized Service for the installation of the product In order to prepare the product for use refer the information in the user manual and ensure that electrical installation and water installation are appropriate If not call a qualified electrician and technician to have any necessary arrangements carried out WARNING Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons WARNING Product must not be plugged in during installation Otherwise there is the risk of death or serious injury ____________________ WARNING If the door clearance of the room where the product shall be place is so tight to prevent passing of the product remove the door of the room and pass the product through the door by turning it to its side if this does not work contact the authorized service Product must not be subjected to direct sun light and kept in humid places Appropriate air ventilation must be provided around your product in orderto achieve an efficient operation If the product is to be placed in a recess in the wall pay attention to leave at least 5 cm distance with the ceiling and side walls 3 2 Installing the plastic wedges Plastic wedge supplied with the product are used to create the distance for the air circulation between the product and the rear wall 1 To install the wedge remove the screws on the product and use the screws supplied together with the wedges 2 Insert the plastic wedge onto the rear ventilation cover as illustrated in the figure Place the product on an even floor surface to prevent jolts Install the product at least 30 cm away from heat sources such as hobs heater cores and stoves and at least 5 cm away from electrical ovens Freezer User Manual 9 EN