Stomer SRS-1100 [7/28] Drywall sander
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Stomer SRS-1100 [7/28] Drywall sander

Stomer SRS-1100 [7/28] Drywall sander
7
Drywall sander
TECHNICAL DATA 1
OPERATION 2
INTENDED USE
Designed for sanding primed drywall construc-
tions, ceilings and walls in internal and external
applications as well as removing carpet residue,
coats of paint, coverings, adhesives and loose
plaster.
SAFETY INSTRUCTIONS
GENERAL SAFETY INSTRUCTIONS
WARNING! Read all safety warnings
and all instructions. Failure to follow the
warnings and instructions may result in
electric shock, fi re and/or serious injury.
Save all warnings and instructions for future ref-
erence.
The term „power tool“ in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
MACHINE-RELATED SAFETY
INSTRUCTIONS
• This machine is designed for sanding. Please
read all of the safety information, instructions,
illustrations and descriptions delivered with
the machine. If the following instructions are
not observed, this can result in an electric
shock, fi re and/or serious injury.
• Do not use this machine to perform work such
as roughing, brushing, polishing or disc sand-
ing. Performing tasks for which the machine is
not designed can create hazards and lead to
injury.
• Never use accessories that were not special-
ly developed and intended for this machine.
Just because an accessory part can be fi tted
on your machine does not guarantee danger-
free operation.
• Wear personal protective equipment. De-
pending on the application, use a shield or
protective goggles. If practical, wear a breath-
ing mask, ear protectors, safety gloves and a
work apron suitable to protect against impact
or small sanding or workpiece parts. The pro-
tective goggles must be capable of blocking fl
ying debris caused by the various work opera-
tions. The breathing mask or device must be
capable of fi ltering particles generated during
work. Continuous exposure to loud noise can
cause loss of hearing.
• Ensure that persons standing near the ma-
chine are at a safe distance from the work
area. All persons in the work area must wear
personal protective equipment. Parts of the
workpiece or broken accessories can fl y off
and cause injury outside the immediate work
area.
• Always hold the machine by the insulated
handles if you intend to perform work that
may pose a risk of cutting into hidden power
cables or your own machine cable. Contact
with live cables transfers an electric current
to metallic machine components and causes
electric shocks.
• Keep the power cable away from rotating
parts. If you lose control, the power cable
could be cut or become stuck and your hand
or arm could be drawn into the rotating parts.
• Never set the machine down until the tool has
stopped completely. Turning tools can catch
on the storage surface, causing you to lose
control of the machine.
• Never allow the machine to operate while
carrying it at your side. The rotating tool can
catch on your clothing by accident and cause
serious cutting injuries.
• Clean the air vent slits on your machine on a
regular basis. The cooling air fan sucks the
dust into the machine and excessive deposits
of metal dust can result in electrical hazards.
• Never operate the machine near combustible
materials. Sparks can ignite these materials.
• Never use tools that have to be liquid-cooled.
Water and other liquid coolants can cause po-
tentially fatal electric shocks.
Cause and prevention of kickbacks
A kickback is a sudden reaction to jamming or
catching of a rotating disc, a support plate, a
brush or other accessory. Jamming or catching
results in a rapid standstill of the rotating acces-
sory, whereby, as a counter-reaction, an out-of-
control machine is accelerated around the jam-
ming point in a direction of rotation opposed to
the accessory.
If, for example, a sanding disc is jammed or
caught by the workpiece, the disc circumfer-
ence can dig into the workpiece surface at the
jamming point, causing the disc to be expelled.
The disc can either fl y towards or away from
the user, depending on the direction of rotation
of the disc at the jamming point. This can also
cause sanding discs to break. A kickback is the
result of misuse of the machine and/or incorrect
method of work or operation and can be avoided
by closely observing the following precautionary
measures.
• Always hold the machine fi rmly and position
your body and arms such that you can control

Содержание

Похожие устройства

Скачать