Home
Главная
Stomer
Шлифовальная Машина
SFS-500
Инструкция по эксплуатации Страница: 4

Stomer SFS-500 [4/40] English

Finishing sander

INTENDED USE

This tool is intended for dry sanding and ﬁ nishing of wood,

painted surfaces, plastic and ﬁ ller

TECHNICAL SPECIFICATIONS 1

PRODUCT ELEMENTS 2

1 On/Off switch

2 Switch locking button

3 Dust bag

SAFETY

WARNING! Read all instructions. Failure to follow all in-

structions listed below may result in electric shock, ﬁ re

and/or serious injury.

• Avoid damage that can be caused by screws, nails and

other elements in your workpiece; remove them before

you start working

• Always keep the cord away from moving parts of the

tool; direct the cord to the rear away from the tool

• When you put away the tool, switch off the motor and

ensure that all moving parts have come to a complete

standstill

• Use completely unrolled and safe extension cords with

a capacity of 16Amps (U.K. 13Amps)

• In case of electrical or mechanical malfunction, imme-

diately switch off the tool and disconnect the plug

• SBM Group can assure ﬂ awless functioning of the tool

only when original accessories are used

• This tool should not be used by people under the age

of 16 years

• The noise level when working can exceed 85 dB(A);

wear ear protection

• If the cord is damaged or cut through while working, do

not touch the cord, but immediately disconnect the plug

• Never use tool when cord is damaged; have it replaced

by a qualiﬁ ed person

• Always check that the supply voltage is the same as

the voltage indicated on the nameplate of the tool (tools

with a rating of 230V or 240V can also be connected to a

220V supply)

• This tool is not suitable for wet sanding

• Do not work materials containing asbestos (asbestos is

considered carcinogenic)

• When sanding metal, sparks are generated; do not use

dustbox and keep other persons and combustible material

from work area

• Do not touch the moving sanding sheet

• Do not continue to use worn, torn or heavily clogged

sanding sheets

• Wear protective gloves, safety glasses, close-ﬁ tting

clothes and hair protection (for long hair)

• Take protective measures when during work dust can

develop that is harmful to one’s health, combustible or ex-

plosive (some dusts are considered carcinogenic); wear a

dust mask and work with dust/chip extraction when con-

nectable

• Always disconnect plug from power source before

making any adjustment or changing any accessory

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):

• Do not connect the blue (= neutral) or brown (= live)

wire in the cord of this tool to the earth terminal of the

plug

• If for any reason the old plug is cut off the cord of this

tool, it must be disposed of safely and not left unattended

• the dust suction requires the use of perforated sanding

sheets

• perforation in sanding sheet should correspond with

perforation in sanding foot

• replace worn sanding sheets in time

• always use the tool with the total sanding surface

covered with sanding paper

• before the sanding surface reaches the workpiece, you

should switch on the tool

• before switching off the tool, you should lift it from the

workpiece

• do not apply too much pressure on the tool; let the

sanding surface do the work for you

Your machine is double insulated in accordance with EN

50144; therefore no earthwire is required.

MAINTENANCE

Make sure that the machine is not live when carrying out

maintenance work on the motor.

Regularly clean the machine housing with a

soft cloth, preferably after each use. Keep the

ventilation slots free from dust and dirt.If the dirt

does not come off use a soft cloth moistened with soapy

water. Never use solvents such as petrol, alcohol, ammo-

nia water, etc. These solvents may damage the plastic

parts.

The machine requires no additional lubrication.

Should a fault occur, e.g. after wear of a part, please con-

tact your local SBM Group dealer.

ENVIRONMENT

In order to prevent the machine from damage during

transport, it is delivered in a sturdy packaging. Most of the

packaging materials can be recycled. Take these materi-

als to the appropriate recycling locations. Take your un-

wanted machines to your local SBM Group dealer. Here

they will be disposed of in an environmentally safe way.

English

Stomer SFS-500 [4/40] English

Содержание

Похожие устройства