Denzel HG-2000E [10/28] At the end of the work
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Denzel HG-2000E [10/28] At the end of the work

Denzel HG-2000E [10/28] At the end of the work
10
HOT AIR GUN
EN
•
do not use the tool near ammable gases and ammable substances (increased explosiveness);
•
ammable and toxic gases may be released when working with plastics, paint, varnish and similar materials; nd
out what materials will be processed and how they react to heat in advance;
•
consider that heat can be transferred to ammable substances out of sight;
•
have a re extinguisher or other extinguishing agent, in case of ignition of any items for safety.
At the end of the work:
•
disconnect the tool from the mains, making sure the switch is in the o position;
•
before storing the tool, let it cool for at least 30 minutes;
•
clean the machine and accessories from dirt and residue mixture.
MAINTENANCE
ATTENTION!
Before starting maintenance and adjustment of the Hot Air Gun unplug the power cord from
the power outlet. To ensure quality and safe functioning keep your tool and vents clean at all
times.
•
If you have noticed a decrease in the air supply speed and the air heating temperature during operation, it is
necessary to hand over the device to the service center for its diagnosis and repair.
•
Electric motor care. You must be especially careful with the electric motor, avoid getting liquids and foreign
objects inside the case. Keep your ventilation holes clean, blow them regularly with compressed air or clean
them with a brush. When noticeable sparks appear, contact an authorized service center for diagnostics and
possibly replacement of carbon brushes.
In case of any damage to the power cord turn o the Hot Air Gun immediately, carefully, without touching the
places of damage, disconnect it from the mains.
ATTENTION!
The tool uses power cord with mounting type Y: for security it must be replaced by authorized
repair shop personnel.
Possible faults
Fault Probable cause Problem solution
The tool turns o during
operation.
Overheating due to improper
operation.
Set the dryer nozzle up, wait
for cooling. Study this manual.
The tool does not turn on.
Broken power cord or mounting
wire, power cord malfunction.
Call the service center.
Faulty switch. Call the service center.
Overheat.
Set the dryer nozzle up,
wait for cooling.
When working smoke or smell
of burning insulation is generated
from the vent.
Fan drive malfunction. Call the service center.
Malfunction of the electrical part
of the instrument.
Call the service center.
Increased tool noise or vibration.
Blockage or destruction of the fan
impeller.
Call the service center.
Maintenance is carried out in specialized service centers. The list of service centers is presented on the website
http://ipsremont.ru/kontakty/.

Содержание

Похожие устройства

Скачать