Denzel AG230-2600 — essential Tips for Using and Maintaining Angle Grinders Safely [11/32]
Макгруп McGrp.ru

Denzel AG230-2600 — essential Tips for Using and Maintaining Angle Grinders Safely [11/32]

Превью страниц Страница 11 / 32
Denzel AG230-2600 [11/32] Recommendations for use
11
ANGLE GRINDER
EN
At the end of the work:
•
disconnect the tool from the mains, making sure the switch is in the “o”;
•
clean the Angle Grinder and accessories from dirt.
Recommendations for use
Before you start processing a part, you must secure it, if it has a light weight.
For maximum grinding performance angle formed by the abrasive wheel and the surface to be treated should be
between 30 – 40 degrees. Move the machine smoothly along the surface to be treated. Thus, the overheat and
change of color of the processed surface is excluded, processing quality is improved.
ATTENTION!
Never use a cutting wheel for grinding.
When cutting with a cutting wheel do not put pressure on the handles of a power tool, tilt power tool. Avoid
vibration and tilting disc. It is necessary to work carefully, taking into account the characteristics of the material
being processed. It is very important to consider the direction of movement of the power tool. Power tools must
be moved against the rotation of the disc; otherwise, there is a risk of losing control of the power tool.
When cutting proles and rectangular pipes it is recommended to start cutting from the narrower end.
Do not overheat the exterior of the machine during prolonged use. If overheated, stop working, let the machine
work without load for 1 ... 2 minutes to cool the engine, turn o the engine and take a break to cool down the
gear housing.
Do not allow the machine to work when there is unwanted or unusual noise in the engine or mechanism. If noise
appears, turn o the machine and contact an authorized service.
NOISE AND VIBRATION
Noise and vibration characteristics are given in the table №1.
However, if the Impact Drill will be used for other work with the use of working tools, not provided by the
manufacturer, or maintenance will not meet the requirements, then the vibration level may be dierent.
ATTENTION!
Always use personal ear protection.
MAINTENANCE
ATTENTION!
Before starting maintenance and adjustment of the Angle Grinder unplug the power cord from the
power outlet. To ensure quality and safe functioning keep your tool and vents clean at all times.
•
If you notice a decrease in the frequency of rotation of equipment or extraneous noise during operation, it is
necessary to hand over the device to the service center for its diagnosis and repair.
•
Working tool maintenance. The use of the worn working tool reduces the eectiveness of the work and may
result in motor or gearbox failure, it is therefore necessary to periodically replace worn out tooling as soon as
this becomes necessary.
•
Electric motor care. You must be especially careful with the electric motor, avoid getting liquids and foreign
objects inside the case. Keep your ventilation holes clean, blow them regularly with compressed air or clean
them with a brush. When noticeable sparks appear, contact an authorized service center for diagnostics and
possibly replacement of carbon brushes.

Содержание

123

Похожие устройства

Learn how to safely operate and maintain angle grinders for optimal performance. Follow essential tips to ensure safety and efficiency during use and maintenance.

Google Play RuStore