Stihl NG 5 клепальный [11/52] Rivet spinning

Stihl NG 5 клепальный [11/52] Rivet spinning
NG 5
English
9
WARNING
Impermissible combinations of cutters
and/or chain links may increase the
kickback tendency of the saw chain
risk of injury.
To reduce the risk of injury from the
sharp cutters, wear protective gloves
when working with the saw chain.
Selecting Spinning Head and Thrust
Screw
N Select the spinning head and thrust
screw to suit the chain pitch.
Rivet Spinning
N Do not change the chain link
assembly pattern.
N Use only identical replacement
chain links.
N Screw the thrust screw (1)
clockwise into the threaded
bushing (2) and fit the spinning
head (3) in the holder (4).
N Fit the matching chain links on a
preset tie strap.
N Place the chain over the two guide
pulleys (5) and engage the drive link
tangs in the grooves. The preset
head of the tie strap must face the
thrust screw.
N Loosen the screws (6) and rotate
the eccentric guide pulleys.
N The rivets in the chain links must be
horizontal and in alignment with the
spinning head. The preset head of
the tie strap must locate in the
recessed end of the thrust screw.
N Tighten down the screws.
N Advance the thrust screw (1) until
the shank of the rivet butts against
the spinning head (3).
N Apply a few drops of oil to the rivet
and the face of the spinning head.
N Turn the thrust screw (1) clockwise
with one hand until moderate
pressure is applied to the rivet. Turn
the crank handle (7) steadily
clockwise with the other hand – the
spinning head forms the new rivet
head. Continue turning the thrust
screw to maintain a constant
pressure on the rivet.
N Spin the rivet until the chain links
are firmly connected but still flexible.
Rivet Spinning
Chain pitch Marking
Spin
-
ning
head
Thrust
screw
1/4" P D D
1/4", 3/8" P, .325" C C
3/8", .404" A A, B
1/2", 15 mm B A, B
A
A, B
588BA007 KN
588BA008 KN
1
3
2
4
5
6
5
6
588BA011 KN
585BA003 KN
1
3
7
588BA012 KN
Oil

Похожие устройства

Скачать