AM.PM Inspire v2.0 F50A02400 [8/20] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

AM.PM Inspire v2.0 F50A02400 [8/20] English

AM.PM Inspire v2.0 F50A02400 [8/20] English

Содержание

Похожие устройства

English Water On Mode 1 Ambient light On Off adjustment When system is in Standby mode press When system in Standby mode press faucet faucet handle shortly to Switch On LED light handle and hold for 5 seconds will enter into is On Water temperature is 25 C water flow the first item in menu LED color is white at the middle level by default settings release the handle and set ambient light on Mode 2 off at this time if ambient light on which will When system is in Standby mode press two convert to off mode if ambient light Off will times faucet handle shortly to Switch On convert to On state LED light is On Water temperature is 38 C water flow at the middle level by default Thermal disinfection settings When system is in Standby mode press and Water Off to the flashing red then release handle When system On press faucet handle thermal disinfection is active hold faucet handle till LED color changed shortly to Switch Off System is in Standby If water temperature from faucet is up mode to 70 C or above hot water runs out for 3 minutes and then water temperature Water flow rate adjustment changed to be 38C and working for When system On press hold and rotate the lOseconds automatically faucet handle counterclockwise to get water If water temperature from faucet is lower flow rate smaller Press hold and rotate than 70 C water runs out for 1 minute and faucet handle clockwise to get water flow then water temperature changed to be 38 C rate higher and working for 10 seconds automatically If you need to stop thermal disinfection Water temperature and flow rate factory defaults adjustment mode press faucet handle shortly When system On in Mode 1 or 2 adjust When system is in Standby mode press and Maximum water flow time temperature and flow rate as you prefer hold faucet handle till flashing LED color is press and keep pressed handle for Color Setting time 5 seconds to save setting for next time using Green 1 minutes LED light will flash 2 times System is in Yellow 5 minutes Standby mode Purple 10 minutes Blue open always Scalding protection When system On if water temperature When you see the required light color exceeds 49 C for 3 seconds system will release the faucet handle and the settings power off automatically for the Maximum water flow time will be saved With the exception of Thermodisinfection mode 8

Скачать