Damixa Object HFON00000 [15/24] Object object
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Damixa Object HFON00000 [15/24] Object object

Damixa Object HFON00000 [15/24] Object object
14 15
OBJECT OBJECT
Basin mixer / kitchen mixer installation
1. Disconnect your water supply system.
2. Connect a  exible pipe to the mixer.
3. Important! To prevent damage to the  exible pipe, twist it into the mixer body manually,
do not use any tools or apply extensive force.
4. Attach mixer to a sanitary ware using the supplied  ttings.
5. Connect the  exible pipe to water supply system: the right hose to cold water supply, the
left hose — to hot water supply.
6. Before connecting the mixer it is recommended to remove (unscrew) the aerator in order to
prevent its clogging at the  rst water feed.
7. Start the water supply system with the mixer in «closed» position and make sure that all
connections are tight. Perform additional connections tightening and sealing if necessary.
8. Open hot and cold water supply for a while, then close water supply and re-install (screw in)
the aerator.
Bath/shower mixer with a long spout and shower set and shower
mixer installation
1. Disconnect your water supply system. Screw eccentric reducers into the water supply
system pipes after sealing the threads with sealing material. Select a position of eccentric
reducers to match and comply with the mixer’s connections position. The mixer should be
in a horizontal position.
2. Before connecting the mixer it is recommended to remove (unscrew) the aerator in order to
prevent its clogging at the  rst water feed.
3. Install decorative plates on the eccentric reducers and connect the mixer’s body using tools
with soft extensions. Install a spout to a bath/shower mixer with a long spout.
4. Start the water supply system with the mixer in «closed» position and make sure that all
connections are tight. Perform additional connections tightening and sealing if necessary.
5. Open hot and cold water supply for a while, then close water supply and re-install (screw in)
the aerator.
6. For bath/shower mixer with a long spout and shower sets attach shower head to the hose
using insertions. Connect the hose to the shower slot on the mixer body. Install wall bracket
for shower head in a convenient place for you.
Warning!
Mixers can operate normally with the following water supply system speci cations:
• Operating pressure interval in water mains is 0.5-6.0 atm. (50-620 kPa).
• Pressure di erence in hot and cold water supply systems can vary up to 10%. If it exceeds this
value, the pressure increase/decrease instruments installation is recommended.
• Maximum allowable hot water temperature: +80С°.
• Install 100-300 μ  lters to prevent foreign objects (abrasive particles) from getting inside the
item.
Conditioning guidelines
Modern sanitary ware, kitchen and shower mixers are manufactured of a wide range
of materials depending on their operational features and design, demanded by the market.
In order to prevent damage to the product while performing its clean-up, consider certain
criteria.
Mixer conditioning agents
Cleaning agents are required for lime deposits removal.
Always observe the following rules during clean-up:
• Never use the agents, containing hydrochloric, formic or acetic acids since they can cause
major damage.
• For the same reason the use of phosphoric acid should be limited.
• Never mix di erent cleaning agents.
• Do not use abrasive cleaning agents or accessories (e.g. some cleaning powders or
micro ber sponges).
Mixer conditioning guidelines
Observe cleaning agent manufacturer’s guidelines and the following rules on their application:
• Use cleaning agents, if necessary, considering the application guidelines.
• Cleaning agent dosage and time of treatment should be chosen depending on the product
features (do not treat the mixers with cleaning agents longer than necessary).
• Treat mixers regularly to prevent calci cation.
•
Spray the aerated cleaning agents on cloth or sponge; do not apply them direc
tly on
sanitary ware, since aerosol drops can get into its holes and cause damage.
• Remove chemical agent residues with clean water immediately after treatment.
Important notes
Liquid soap, shampoo or shower gel residues also can cause damage. Carefully wash
sanitary ware with clean water to prevent it. The use of cleaning agents on damaged
areas enlarges the areas of damage.
Our company’s warranty does not cover damages, caused by improper handling.

Содержание

Похожие устройства

Скачать