Bosch EasyGrassCut 26 (06008C1J00) Инструкция по эксплуатации онлайн [18/309] 669630

Bosch EasyGrassCut 26 (06008C1J00) Инструкция по эксплуатации онлайн [18/309] 669630
18 | English
u Inspect and maintain the trimmer
regularly.
u Always wear gloves when cleaning
product or replacing cutting means.
u Be careful of injuries from the blade
used for cutting the cutting line.
After feeding cutting line, always re-
turn the trimmer to a horizontal
working position before switching
on.
Switch the garden tool off and remove
the plug from the socket:
whenever you leave the machine
unattended for any period of time
before replacing the cutting line
if the cable is tangled,
before cleaning or working on the
trimmer
before storing the trimmer
u Store the product in a secure, dry
place out of the reach of children. Do
not place other objects on top of the
product.
Electrical Safety
u Switch the machine off and pull
the mains plug before actuating
the manual-feed button. This but-
ton should only be used in the
event of an obstruction of the cut-
ting line.
Warning! Switch the
product off and pull the
mains plug before any main-
tenance or cleaning. The same ap-
plies when the mains cable is dam-
aged, cut or entangled.
Your product is double insulated for
safety and requires no earth connec-
tion. The operating voltage is 230V
AC, 50Hz (for non-EU countries
220V, 240V as applicable). Contact
your Bosch Service Centre for details.
If in doubt contact a qualified electri-
cian or the nearest Bosch Service
Centre.
For increased electrical safety use a
Residual Current Device (RCD) with a
tripping current of not more than
30mA. Always check your RCD every
time you use it.
Keep the supply cables away from
moving hazardous parts and avoid
damage to the cables; this can lead to
contact with live parts.
The connections (plugs and sockets)
should be kept dry and off the ground.
The supply cables must be inspected
for signs of damage at regular intervals
and may only be used if in perfect con-
dition.
If the supply cable on the product is
damaged, it must only be replaced by
a Bosch Service Centre. Only use ap-
proved extension cables.
Use only extension cords, cables,
leads, cable reels that comply with EN
61242/IEC 61242 or IEC 60884-2-7.
If you want to use an extension cable
when operating your product, only the
following cable dimensions should be
used:
Nominal conductor area of
1.25mm
2
or 1.5mm
2
F 016 L81 799 | (24.10.2018) Bosch Power Tools

Содержание

Похожие устройства

Скачать
Случайные обсуждения

Ответы 0

как заменить катушку?
1 год назад

Ответы 1

Как заменит леску
2 недели назад