Dewalt DCM561P1S [8/17] Warning
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Dewalt DCM561P1S [8/17] Warning

Dewalt DCM561P1S [8/17] Warning
7
English
b ) Use only the manufacturer’s recommended
replacement parts andaccessories.
c ) Inspect and maintain the machine regularly. Have
the machine repaired only by an authorizedrepairer.
d ) When not in use, store the machine out of the reach
ofchildren.
Additional Safety Instructions for Grass
Trimmers
WARNING: Cutting elements continue to
rotate after the motor is switchedoff.
• Wear long trousers to protect yourlegs.
• Before using the appliance, check that your cutting path
is free from sticks, stones, wire and any otherobstacles.
• Only use the appliance in the upright position, with the
cutting line near the ground. Never switch the appliance on
in any otherposition.
• Move slowly when using the appliance. Be aware that
freshly cut grass is damp andslippery.
• Do not work on steep slopes. Work across the face of slopes,
not up anddown.
• Never cross gravel paths or roads while the appliance
isrunning.
• Never touch the cutting line while the appliance
isrunning.
• Do not put the appliance down until the cutting line has
come to a complete standstill.
• Use only the appropriate type of cutting line. Never use
metal cutting line or fishingline.
• Be careful not to touch the line trimmingblade.
• Keep hands and feet away from the cutting line at all
times, especially when switching on themotor.
• Before using the appliance and after any impact, check
for signs of wear or damage and repair asnecessary.
• Take care against injury from any device fitted for
trimming the filament line length. After extending new
cutter line always return the machine to its normal operating
position before switchingon.
• Close supervision is necessary when the appliance is
used nearchildren.
• This appliance is not intended for use by young or infirm
persons withoutsupervision.
• This appliance is not to be used as atoy.
• Use in a dry location only. Do not allow the appliance to
becomewet.
• Do not immerse the appliance inwater.
• Do not open the body casing. There are not user-serviceable
parts inside
• Do not operate the appliance in explosive atmospheres,
such as in the presence of flammable liquids, gases
ordust.
• When the appliance is stored or transported in a
vehicle it should be placed in the boot or restrained to
prevent movement following sudden changes in speed
ordirection.
• When not in use, the appliance should be stored in a dry,
well ventilated place out of reach ofchildren.
• Children should not have access to storedappliances.
Safety of Others
• This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for theirsafety.
• Children must be supervised to ensure that they do not
play with theappliance.
Residual Risks
In spite of the application of the relevant safety regulations
and the implementation of safety devices, certain residual risks
cannot be avoided. These are:
• Injuries caused by touching any rotating/movingparts.
• Injuries caused when changing any parts, blades
oraccessories.
• Injuries caused by prolonged use of a tool. When using any
tool for prolonged periods ensure you take regularbreaks.
• Impairment ofhearing.
• Health hazards caused by breathing dust developed when
using your tool (example: working with wood, especially oak,
beech and MDF.)
Electrical Safety
The electric motor has been designed for one voltage only.
Always check that the battery pack voltage corresponds to the
voltage on the rating plate. Also make sure that the voltage of
your charger corresponds to that of yourmains.
Your
DeWALT
charger is double insulated in
accordance with EN60335; therefore no earth wire
isrequired.
If the supply cord is damaged, it must be replaced by a
specially prepared cord available through the
DeWALT
serviceorganisation.
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the oldplug.
• Connect the brown lead to the live terminal in theplug.
• Connect the blue lead to the neutralterminal.
WARNING: No connection is to be made to
the earthterminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 3A.

Содержание

Похожие устройства

Скачать