Metabo BS 18 LTX Impuls new (602191890) без акк и з.у [13/72] Repairs

ENGLISH en

and has no influence on the function or the

service life of the machine.

7.8 Keyless chuck

Fig. H

With a soft tool shank, retightening may be required

after a short period of operation.

Notes on

machines with the designation SB...

1. The ratchet sound which can possibly be heard

after opening the drill chuck is functional and is

switched off by a reverse rotation of the sleeve.

2. Clamping tool:

Turn sleeve (1) in direction "GRIP, ZU" until the

noticeable mechanical resistance has been

overcome.

Caution! The chuck is not yet fully tight-

ened! Keep turning the sleeve (it must "click"

when turning)) until it cannot be turned any

further - only now is the tool safely clamped.

Cleaning: From time to time, hold the machine

vertically with the keyless chuck facing

downwards and turn the sleeve fully in direction

"GRIP, ZU" and then turn fully in direction

"AUF, RELEASE". The dust collected falls from

the keyless chuck.

7.9 Unscrewing chuck

Fig. I

Employ the same procedure when attaching the

chuck, except in reverse order.

7.10 Chuck with quick bit change system (for

BS 14.4 LTX Quick, BS 18 LTX Quick)

Fig. J

To remove: Push the interlock ring forward (a),

advance and pull off the chuck (b).

To mount: Push the interlock ring forward and

move the chuck as far as the limit stop on the drill

spindle.

7.11 Attaching the belt hook (depending on

machine features) / bit depot (depending

on machine features

Fig. K

Attach the belt hook to the left (8), as shown.

Attach the bit depot to the right (7), as shown.

8.1

The machine's multifunctional monitoring

system

If the machine switches off automatically, the

machine electronics have activated automatic

protection mode. A warning signal sounds (contin-

uous beeping). The beeping stops after a maximum

of 30 seconds or when the trigger (15) is released.

In spite of this protective function, overloading

is still possible with certain applications and

can result in damage to the machine.

Causes and remedies:

1. Battery pack almost empty

Fig. A, B (The

electronics protect the battery pack against

damage through total discharge).

If one LED is flashing (11), the battery pack is

almost flat. If necessary, press the (10) button

and check the LEDs (11) to see the charge

level. If the battery pack is almost flat, it must be

recharged.

2. Long continuous overloading of the machine will

activate the temperature cut-out.

Leave the machine or battery pack to cool.

Note: If the battery pack feels very warm, the

pack will cool more quickly in an "AIR COOLED"

charger.

Note: The machine will cool more quickly if you

operate it at idling speed.

3. Metabo safety shutdown: The machine was

SWITCHED OFF automatically. If the slew rate

of the current is too high (for example, if the

machine suddenly seizes or kickback occurs),

the machine switches off. Switch off the machine

at the trigger (15). Switch it on again and

continue to work as normal. Try to prevent the

machine from seizing.

Switch off the machine at the trigger (15). Then

continue working as normal. Try to prevent the

machine from seizing.

8.2 Note:

The LED lamp (14) switches off automatically after

a specific time.

To activate the electronic functions: press the

trigger (15).

Only use original Metabo battery packs and Metabo

accessories.

Use only accessories that fulfil the requirements

and specifications listed in these operating instruc-

tions.

Fit accessories securely. Secure the machine if it is

operated in a bracket. Loss of control can cause

personal injury.

For a complete range of accessories, see

www.metabo.com or the main catalogue.

Repairs to electrical tools must be carried out

by qualified electricians ONLY!

If you have Metabo electrical tools that require

repairs, please contact your Metabo service centre.

For addresses see www.metabo.com.

You can download spare parts lists from

www.metabo.com.

Do not allow battery packs to come into contact with

water!

To protect the environment, do not dispose of

power tools or battery packs in household

waste. Observe national regulations on

separated collection and recycling of disused

machines, packaging and accessories.

8. Troubleshooting

9. Accessories

10. Repairs

11. Environmental Protection

Metabo BS 18 LTX Impuls new (602191890) без акк и з.у [13/72] Repairs

Содержание

Похожие устройства