Sinbo SMX-2725 [9/42] Before using mixer

- 8 -

BEFORE USING MIXER

Before assembling the hand/stand mixer, be sure the power cord is unplugged from the

power outlet and the speed selector is in the “0” position.

1. Attach the hand mixer to the stand as illustrate in Fig.1, for detaching the hand mixer,

push the hand mixer in the arrow indicated direction (Fig.2), And hold the head of mixer to

tilt position while pressing the headlock button (Fig.3).

2. Assemble proper beaters or dough hooks into mixer. Dough hooks are only used for

mixing dough and beaters are only used for beating eggs or similar food.

Note: Beaters can be inserted in either socket, as the beaters are identical. For dough

hooks, the one with washer can only be inserted into the big socket and the other one can

only be inserted into small socket. The two dough hooks cannot be inserted in reverse.

3. Place the stainless mixing bowl on position.

4. To lower the head and beaters/dough hooks into the mixing bowl, depress the headlock

button while holding the head with the other hand and ease the head down (Fig.4), A click

sound will be heard when the head has reached the correct position.

USING YOUR MIXER

1. Ensure that the unit is at the 0 setting, then plug in the power source.

2. Turn the speed selector to your desired setting, there is 6 setting. the appliance will start

working and the speed will increase 25% if the Turbo Button depressed at any time.

Warning: Do not stick knife, metal spoons, fork and so on into bowl when operating.

3. The max operation time per time shall not exceed 5 minutes and minimum 10 minutes

rest time must be maintained between two consecutive cycles. When kneading yeast dough,

suggest the speed selector first use a low speed and then use high speed to achieve the

best results.

4. When mixing is completed, turn the speed selector to 0 setting, unplug the cord from

power outlet.

5. Hold down the headlock button and ease the head of the mixer back until the mixer head

is locked into the tilt position.

6. If necessary you can scrape the excess food particles from the beaters or dough hooks

by rubber or wooden spatula.

7. Hold the beaters/dough hooks with one hand and press the Ejector button firmly down

with the other hand, remove the beater/dough hooks.

Caution: The speed selector must be at zero position before pressing down Ejector button

to remove accessories. Never pressing the Ejector button when the appliance is operating.

8. The hand mixer can be used separately without the stand in position.