Kress KU290 [10/16] Environmental protection
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Kress KU290 [10/16] Environmental protection

Kress KU290 [10/16] Environmental protection
10
EN
LED Light Indicator
Before operation, the light will be
activated when the On/Off switch is
slightly depressed, and will automati-
cally turn off 10 seconds after the
On/Off switch is released.
The tool and battery are equipped
with a protection system. The Light
will quickly ash (approximately once
a second, and stop ashing when
you release the trigger), the system
will automatically cut off power to
the tool to extend battery life. The
tool will automatically stop during
operation if the tool and/or battery
are placed under one of the following
conditions:
• Overloaded: The tool is operated
in a manner that causes it to draw
an abnormally high current. In this
situation, release the Trigger Switch
on the tool and stop the application
that caused the tool to become
overloaded. Then pull the Trigger
Switch again to restart.
• Overheated: Under the condition
above, if the tool does not start, the
Tool and Battery are overheated. In
this situation, let the Tool and Battery
cool before pulling the Trigger Switch
again.
• Low battery voltage: The
remaining Battery capacity is too low
and the tool will not operate. In this
situation, remove and recharge the
Battery.
WARNING: To turn on the
light, press the On/Off switch
and make sure the Forward/Reverse
Rotation Control is on right/left
position.
See Fig. E
TROUBLE SHOOTING
1.I can not fit the battery into the battery charger.
Why?
The battery can be inserted into the charger only in one
direction. Turn the battery around until it can be inserted
into the slot.
2. Reasons for different battery pack working
times
Charging time problems, as above, and having not
used a battery pack for a prolonged time will reduce the
battery pack working time. This can be corrected after
several charge and discharge operations by charging &
working with your drill. Heavy working conditions such
as large screws into hard wood will use up the battery
pack energy faster than lighter working conditions. Do
not re-charge your battery pack below 0
o
C (32
o
F) and
above 40
o
C (104
o
F) as this will affect performance.
MAINTENANCE
Remove the battery pack from the tool before
carrying out any adjustment, servicing or
maintenance.
Your power tool requires no additional lubrica-
tion or maintenance.
There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth. Always
store your power tool in a dry place. Keep the motor
ventilation slots clean. Keep all working controls free
of dust. Occasionally you may see sparks through the
ventilation slots. This is normal and will not damage
your power tool.
FOR BATTERY TOOLS
The ambient temperature range for the use and storage
of tool and battery is 0
o
C-45
o
C (32°F-113°F).
The recommended ambient temperature range for the
charging system during charging is 0
o
C-40
o
C (32°F-
104°F).
ENVIRONMENTAL
PROTECTION
Disposal
The machine, its accessories and packaging
materials should be sorted for environmentally
friendly recycling. The plastic components are labeled
for categorized recycling.

Содержание

Похожие устройства

Скачать