VTS F-VS-SD-300-WD [9/72] Technical specifications

VTS F-VS-SD-1600-WD [9/72] Technical specifications
02
FVS FAN COIL UNITS - GENERAL
9
Unit Casing:
Galvanized steel casing of minimum 0.8 mm thickness. Casing is internally lined with 6mm closed
cell elastomeric foam insulation.
Drain Tray:
They are fabricated from heavy gauge galvanized steel and are insulated to prevent condensation.
Powder coated on both sides to RAL 9002.
Cooling Coils:
Fabricated from copper tubes mechanically bonded with aluminum ns and are leak tested at 350 Psig nitrogen
pressure.
Blower:
Fans are forward curved centrifugal type of double inlet, statically and dynamically balanced to ensure quiet
operation.
Air Filters:
All Units are provided with 25 mm Aluminum Mesh lter as a standard option. Filters accessible from rear end of
the unit and is easily removable by pulling out from unit frame.
Fan Motors:
Motors are single phase, 3 speed, 220-240V/1 Phase/50 Hz with internal thermal protection. EC motors available
as an option.
Options:
Double skin fan coil units with casing made of 0.8mm galvanized steel sheet and 10mm close cell insulation.
Decorative fan coil units, suitable for wall or ceiling mounting.
Technical Specifications

Содержание

Скачать