Home
Главная
Град-М
Шуруповерты И Винтоверты
ДА-14х2ДКС
Инструкция по эксплуатации Страница: 15

Град-М ДА-14х2ДКС [15/28] Environment

• Flawless functioning of the tool can be guaranteed

only when original accessories are used

• Use only accessories with an allowable speed match-

ing at least the highest no-load speed of the tool

• This tool should not be used by people under the age

of 16 years

• Be careful not to drill or drive into areas where elec-

trical wires may be contacted

• Ensure that switch (2) is in the middle (locking) po-

sition before making any adjustments or changing

accessories as well as when carrying or storing the

tool

• Do not touch the contacts in the charger

• Do not expose tool/charger/battery to rain

• Never charge battery outdoors

• Store tool/charger/battery in locations where tem-

perature will not exceed 40° C or drop below 0° C

• Batteries will explode in ﬁ re, so do not burn battery

for any reason

• When damaged, and under extreme usage and tem-

perature conditions, batteries may start to leak

- if liquid comes into contact with the skin, wash

quickly with soap and water, then with lemon juice

or vinegar

- if liquid gets into the eyes, ﬂ ush eyes with clean

water for a minimum of 10 minutes and seek imme-

diately medical attention

• When battery is not in tool or charger, it should be

kept away from metal objects such as nails, screws,

keys etc. to prevent short-circuit

• Do not use charger when damaged; take it to one of

the ofﬁ cially registered Service Stations for a safety

check

• Do not use battery when damaged; it should be re-

placed immediately

• Do not disassemble charger or battery

• Do not attempt to recharge non-rechargeable batter-

ies with the charger

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):

• Do not connect the blue (= neutral) or brown (= live)

wire in the cord of the charger to the earth terminal of

the plug

• If for any reason the old plug is cut off the cord of the

charger, it must be disposed of safely and not left

unattended

To ensure longer service life and proper

performance of the battery, take the following

actions when you start using new battery:

1. Use the new battery, without recharging it, till its

complete discharge.

2. Then charge the battery for 3-5 hours.

3. Repeat abovementioned actions (1 and 2) 3-5 times

to reach the nominal battery capacity.

MAINTENANCE

Make sure that the machine is not live when

carrying out maintenance work on the motor.

Regularly clean the machine housing with a soft cloth,

preferably after each use. Keep the ventilation slots free

from dust and dirt.If the dirt does not come off use a soft

cloth moistened with soapy water. Never use solvents

such as petrol, alcohol, ammonia water, etc. These sol-

vents may damage the plastic parts.

The machine requires no additional lubrication.

Should a fault occur, e.g. after wear of a part, please

contact your local dealer.

ENVIRONMENT

In order to prevent the machine from damage during

transport, it is delivered in a sturdy packaging. Most of

the packaging materials can be recycled. Take these

materials to the appropriate recycling locations. Take

your unwanted machines to your local dealer. Here they

will be disposed of in an environmentally safe way.

NiCd batteries can be recycled. Deliver them to a dis-

posal site for chemical waste so that they can be re-

cycled or disposed of in an environmentally friendly

manner.

Град-М ДА-14х2ДКС [15/28] Environment

Содержание

Похожие устройства