![Graco REACTOR 3 E-30 IHR333 [12/26] Connecting hose bundle sections](/img/pdf.png)
Graco REACTOR 3 E-30 IHR333 [12/26] Connecting hose bundle sections
![Graco REACTOR 3 E-30 CSR332 [12/26] Connecting hose bundle sections](/views2/1900731/page12/bgc.png)
Installation
12 3A7683G
Connecting Hose Bundle
Sections
To connect internally heated hoses and whip hoses to
another hose:
1. Lay the heated hoses end-to-end. Align the fluid
hoses (GH) red to red (component A, ISO) and blue
to blue (component B, RES).
2. Connect the fluid hoses (FH) and tighten the
connections finger tight, then fully tighten the
connections with wrenches.
NOTE: Torque hoses to 3/8 in. (9.5 mm) ID hoses to:
• A side to 14 ft-lb (19 N•m).
• B side to 20 ft-lb (27 N•m).
NOTE: When connecting the fluid hoses, ensure that
red hoses are connected to red hoses and blue hoses
are connected to blue hoses.
3. Connect the air hoses (AH) and tighten the
connections finger tight, then fully tighten the
connectors with wrenches.
4. Connect electrical wires (EW). Tighten the electrical
connector screws.
NOTE: Torque electrical connector screws to 3-6
in-lb Do not over-tighten the connector screws.
NOTE: When connecting the electrical wires,
ensure that red wires are connected to red wires
and blue wires are connected to blue wires.
5. For hoses with RTD cables: Connect the RTD
cables (RTD) and tighten the connections.
NOTE: RTD Cables are an optional accessory and
only needed when the FTS kit is used.
6. Tape excess electrical wire (EW) to the fluid hoses
(FH). Stagger the electrical connectors as shown to
create the smallest joint bundle possible.
7. Check Hoses for Leaks, page 13.
8. Cover the joint with protective covering. See
Protective Covering, page 14.
ti40421b
FH
FH
FH
FH
AH
AH
EW
EW
ISO
(red)
RES
(blue)
ISO
(red)
RES
(blue)
FH
EW
FH
AH
FH
EW
FH
AH
Содержание
- A7683g 1
- For use with reactor 3 proportioners for professional use only not approved for use in explosive atmospheres or hazardous classified locations 1
- Heated hose 1
- Important safety instructions 1
- Instructions 1
- Reacto 1
- Contents 2
- Overview 2
- Related manuals 2
- A hose 3
- B hose 3
- Fluid temperature sensor kits 3
- Hose bundle part numbers 3
- Reactor 3 main hoses 3
- Whip hoses 3
- Warning 4
- Warnings 4
- Warning 5
- Warning 6
- Important isocyanate iso information 7
- Isocyanate conditions 7
- Changing materials 8
- Foam resins with 245 fa blowing agents 8
- Keep components a and b separate 8
- Material self ignition 8
- Moisture sensitivity of isocyanates 8
- Component identification 9
- Ref description a gun b whip hose c joint protector d main hose bundle g reactor 9
- Externally heated main hose 10
- Grounding 10
- Installation 10
- Internally heated main hose 10
- Whip hose 10
- Connect hoses to proportioner 11
- Connecting hose bundle sections 12
- Check hoses for leaks 13
- Connect whip hose to gun or gun manifold 13
- Hoses with hook and loop scuff jackets 14
- Protective covering 14
- Operation 15
- Hose control modes 16
- Pressure relief procedure 16
- End of product life 17
- Externally heated hoses 17
- Internally heated hoses 17
- Maintenance 17
- Preventative maintenance 17
- Recycling and disposal 17
- Replacing individual a or b hose 17
- Internally heated hose 25p437 18
- Note the hose model is shown with the optional sensor cable but is representative of all internally heated hoses 18
- Internally heated hose parts list 19
- Externally heated hose 20
- Warning 20
- Externally heated hose parts list 21
- Fts kit 18e175 22
- Scuff wrap kit 18e178 22
- See gun manual 22
- Whip hose 25p775 22
- Whip hose parts list 23
- Accessories 24
- California proposition 65 25
- California residents 25
- Reactor 3 heated hose 25
- Technical specifications 25
- Warning cancer and reproductive harm www p65warnings ca gov 25
- For the latest information about graco products visit www graco com for patent information see www graco com patents 26
- Graco headquarters minneapolis international offices belgium china japan korea 26
- Graco inc and subsidiaries p o box 1441 minneapolis mn 55440 1441 usa copyright 2020 graco inc all graco manufacturing locations are registered to iso 9001 26
- Graco information 26
- Graco standard warranty 26
- To place an order contact your graco distributor or call to identify the nearest distributor phone 612 623 6921 or toll free 1 800 328 0211 fax 612 378 3505 26
- Www graco com revision 26
Похожие устройства
- Graco REACTOR 3 E-30 ISR330 Инструкция по эксплуатации
- Graco REACTOR 3 E-30 ISR330 Брошюра
- Graco REACTOR 3 E-30 ISR330 Сертификат
- Graco REACTOR 3 E-30 ISR330 Техническая документация
- Graco REACTOR 3 E-30 ISR331 Инструкция по эксплуатации
- Graco REACTOR 3 E-30 ISR331 Брошюра
- Graco REACTOR 3 E-30 ISR331 Сертификат
- Graco REACTOR 3 E-30 ISR331 Техническая документация
- Graco REACTOR 3 E-30 ISR332 Инструкция по эксплуатации
- Graco REACTOR 3 E-30 ISR332 Брошюра
- Graco REACTOR 3 E-30 ISR332 Сертификат
- Graco REACTOR 3 E-30 ISR332 Техническая документация
- Graco REACTOR 3 E-30 ISR333 Инструкция по эксплуатации
- Graco REACTOR 3 E-30 ISR333 Брошюра
- Graco REACTOR 3 E-30 ISR333 Сертификат
- Graco REACTOR 3 E-30 ISR333 Техническая документация
- Alex Baitler GARDA 170х75 см, акрил Инструкция по эксплуатации
- Alex Baitler MADIN 150х75 см, акрил Инструкция по эксплуатации
- Alex Baitler MADIN 170х75 см, акрил Инструкция по эксплуатации
- Alex Baitler MADIN 180х80 см, акрил Инструкция по эксплуатации