Timberk T-EC1000-S2M Инструкция по эксплуатации онлайн [18/28] 683994

IM2022

the plug is heated to a temperature above 50

С, in order to avoid damage, accidents, fire, due to poor

electrical contact replace the socket with help of a specialist.

WARNING!

The power socket should be rated at least 10A. Electric cable with a core with cross-section of at least 3x1.5

(copper)

8. OPERATION OF THE DEVICE

Fig. 5

1. Thermostat knob

2. Power mode switch

Turning on

Connect the convector to the mains by inserting the plug of the power cord into a power outlet,

and set the power mode switch to the "I" position.

Heating power mode selection

Set the power mode switch to “I” to select a low heating output. Set another switch button to the “I” position

to select a high heating output.

Temperature setting

Turn the thermostat knob fully clockwise. When the room temperature reaches the set level, turn the

thermostat knob counterclockwise until the appliance turns off. Now the thermostat will maintain the set

temperature, periodically turning the convector on and off.

Turning off

Set the switch key to the “O” position and disconnect the device from the mains.

9. CLEANING AND MAINTENANCE OF THE UNIT

The external body of the device must be regularly cleaned from dust and dirt, because this affects the

efficiency of its work.

Before cleaning, turn off the device and unplug it from the network, let it cool, then wipe its body with a soft,

slightly damp cloth. Then wipe it dry and allow the device to dry completely. It is not recommended to use

detergents, including detergents with abrasive compounds to clean the body of the device. Do not damage

the appliance with sharp objects, because scratches on paint can cause rust.