Sencor SPT 330 [5/11] Operating instructions

OPERATING INSTRUCTIONS POWER SOURCE 3 Connect the AC adaptor to the DC IN jack on the back of of the unit firmly and plug it into a wall outlet 4 Slide the power switch on the back of the unit to ON positon the unit is in standby mode and the standby indicator will change to red colour 5 You can now press the button on unit or remote control to turn on the unit The standby indicator will be changed to light off 6 Slide the power switch on the back of the unit to OFF positon and pull the AC adaptor out of the wall outlet if you want to switch off completely CLOCK SETTING During in the STANDBY mode 7 Press and hold PROG button on unit or remote control until the time displays 24 hour digit flashing 8 Press or button to adjust 12 hour or 24 hour digit 9 Press PROG button again the time display HOUR digit flashes press the or button to adjust HOUR digit Press PROG button once more the MINUTE digit flashes adjust it by the or button 4 Press PROG button again to confirm the time 5 Each enable state as shown above will be cleared if the key is not pushed in 10 seconds RADIO OPERATION TUNNING 1 Press STANDBY ON button on the unit or remote control to turn on the unit and press the FUNCTION button on the unit or FM button on remote control to select the TUNER mode 2 Press or button will change the frequency by 0 05MHz 3 Press k or button for approx 1 second to active automatic tuning Automatic tuning stops when the first station with a sufficiently strong signal has been found The display shows STEREO when a stereo signal is beiing received MONO STEREO SELECT This unit can receive the FM mode only When you press FM MONO STOP button on remote control the FM STEREO indicator will turn off switch to MONO FM status STATION MEMORY You can also preset stations of your choice and store up 20 FM stations in its memory 1 Tune to the required station 2 Press PROG button on unit or remote The station number flashes in raj the display FM nu nni 3 Press k or button for your desired station number 1 jn OHJim 4 Press PROG button to store the station 5 Repeat steps 1 to 4 to store more stations or change previously stored stations EN 4

Скачать