Gigabyte Z790 UD AX [39/42] United states of america federal communications commission statement
![Gigabyte Z790 UD [39/42] United states of america federal communications commission statement](/views2/1918686/page39/bg27.png)
- 39 -
Supplier's Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Product Name: Motherboard
Trade Name: GIGABYTE
Model Number: Z790 UD AX/Z790 UD AC/Z790 UD/Z790 D DDR4
Responsible Party – U.S. Contact Information: G.B.T. Inc.
Address: 17358 Railroad street, City Of Industry, CA91748
Tel.: 1-626-854-9338
Internet contact information: https://www.gigabyte.com
FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules, Subpart B, Unintentional Radiators.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired operation.
Regulatory Notices
United States of America, Federal Communications Commission Statement
Antenna use:
In order to comply with FCC RF exposure limits, low gain integrated
antennas should be located at a minimum distance of 7.9 inches (20 cm)
or more from the body of all persons.
Explosive Device Proximity Warning
Warning: Do not operate a portable transmitter (such as a wireless network
device) near unshielded blasting caps or in an explosive environment
unless the device has been modied to be qualied for such use.
Antenna Warning
The wireless adapter is not designed for use with high-gain antennas.
Use On Aircraft Caution
Caution: Regulations of the FCC and FAA prohibit airborne operation of
radio-frequency wireless devices because their signals could interfere with
critical aircraft instruments.
Other Wireless Devices
Safety Notices for Other Devices in the Wireless Network: Refer to the
documentation supplied with wireless Ethernet adapters or other devices
in the wireless network.
Canada, Canada-Industry Notice:
This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that
may cause undesired operation of the device.
Cet appareil est conforme aux normes Canada d'Industrie de RSS
permis-exempt. L'utilisation est assujetti aux deux conditions suivantes:
(1) le dispositif ne doit pas produire de brouillage préjudiciable, et
(2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage
susceptible de provoquer un fonctionnement indésirable.
Caution: When using IEEE 802.11a wireless LAN, this product is restricted
to indoor use due to its operation in the 5.15-to 5.25-GHz frequency
range. Industry Canada requires this product to be used indoors for the
frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for
harmful interference to co-channel mobile satellite systems. High power
radar is allocated as the primary user of the 5.25-to 5.35-GHz and 5.65 to
5.85-GHz bands. These radar stations can cause interference with and/or
damage to this device. The maximum allowed antenna gain for use with
this device is 6dBi in order tocomply with the E.I.R.P limit for the 5.25-to
5.35 and 5.725 to 5.85 GHz frequency range in point-to-point operation. To
comply with RF exposure requirements all antennas should be located at a
minimum distance of 20cm, or the minimum separation distance allowed
by the module approval, from the body of all persons.
Attention: l'utilisation d'un réseau sans l IEEE802.11a est restreinte à
une utilisation en intérieur à cause du fonctionnement dansla bande de
fréquence 5.15-5.25 GHz. Industry Canada requiert que ce produit soit
utilisé à l'intérieur des bâtiments pour la bande de fréquence 5.15-5.25
GHz an de réduire les possibilités d'interférences nuisibles aux canaux
co-existants des systèmes de transmission satellites. Les radars de
puissances ont fait l'objet d'une allocation primaire de fréquences dans
les bandes 5.25-5.35 GHz et 5.65-5.85 GHz. Ces stations radar peuvent
créer des interférences avec ce produit et/ou lui être nuisible. Le gain
d'antenne maximum permissible pour une utilisation avec ce produit est de
6 dBi an d'être conforme aux limites de puissance isotropique rayonnée
équivalente (P.I.R.E.) applicable.
dans les bandes 5.25-5.35 GHz et 5.725-5.85 GHz en fonctionnement
point-à-point. Pour se conformer aux conditions d'exposition de RF toutes
les antennes devraient être localisées à une distance minimum de 20 cm,
ou la distance de séparation minimum permise par l'approbation du module,
du corps de toutes les personnes.
Under Industry Canada regulations, this radio transmitter may only operate
using an antenna of a type and maximum (or lesser) gain approved for
the transmitter by Industry Canada. To reduce potential radio interference
to other users, the antenna type and its gain should be chosen so that
the equivalent isotropically radiated power (e.i.r.p.) is not more than that
necessary for successful communication.
Conformément à la réglementation d'Industrie Canada, le présent émetteur
radio peut fonctionner avec une antenne d'un type et d'un gain maximal
(ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le
but de réduire les risques de brouillage radio électrique à l'intention des
autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte
que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas
l'intensité nécessaire à l'établissement d'une communication satisfaisante.
The FCC with its action in ET Docket 96-8 has adopted a safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted
by FCC certied equipment. The Intel PRO/Wireless 5000 LAN products meet the Human Exposure limits found in OET Bulletin 65, 2001, and ANSI/
IEEE C95.1, 1992. Proper operation of this radio according to the instructions found in this manual will result in exposure substantially below the FCC's
recommended limits.
The following safety precautions should be observed:
• Do not touch or move antenna while the unit is transmitting or receiving.
• Do not hold any component containing the radio such that the antenna is very close or touching any exposed parts of the body, especially the face
or eyes, while transmitting.
• Do not operate the radio or attempt to transmit data unless the antenna is connected; if not, the radio may be damaged.
• Use in specic environments:
- The use of wireless devices in hazardous locations is limited by the constraints posed by the safety directors of such environments.
- The use of wireless devices on airplanes is governed by the Federal Aviation Administration (FAA).
- The use of wireless devices in hospitals is restricted to the limits set forth by each hospital.
Содержание
- Copyright 2
- Disclaimer 2
- Identifying your motherboard revision 2
- Chapter 1 product introduction 3
- Chapter 2 hardware installation 3
- Chapter 3 bios setup 4 3
- Chapter 4 installing the operating system and drivers 6 3
- Chapter 5 appendix 8 3
- Table of contents 3
- 1 motherboard layout 4
- Chapter 1 product introduction 4
- J only for z790 ud ax k only for z790 ud ac 4
- Z790 ud ax z790 ud ac z790 ud 4
- Z790 d ddr4 5
- 2 box contents 6
- 1 installation precautions 7
- Chapter 2 hardware installation 7
- 2 product specifications 8
- 2 productspecifications 8
- 3 installing the cpu and cpu cooler 12
- A note the cpu orientation 12
- B installing the cpu 13
- Do not force to engage the cpu socket locking lever when the cpu is not installed correctly as this would damage the cpu and cpu socket 13
- Follow the steps below to correctly install the cpu into the motherboard cpu socket 13
- Be sure to install the cpu cooler after installing the cpu actual installation process may differ depending the cpu cooler to be used refer to the user s manual for your cpu cooler 14
- C installing the cpu cooler 14
- 4 installing the memory 15
- Dualchannelmemoryconfiguration 15
- 5 installing an expansion card 16
- 6 back panel connectors 17
- Displayport jkl 17
- Hdmi 2 port 17
- Ps 2 keyboard mouse port 17
- Sma antenna connectors 2t2r j 1t1r k 17
- Usb 2 1 port 17
- Usb 2 1 port jkl 17
- Usb 2 1 port q flash plus port 17
- Usb 3 gen 1 port 17
- Line in rear speaker out 18
- Line out front speaker out 18
- Mic in center subwoofer speaker out 18
- Port with usb 3 gen 2x2 support 18
- Rj 45 lan port 18
- Usb 3 gen 2 type a port red 18
- Usb type 18
- 7 onboard buttons and leds 19
- Qflash_plus q flash plus button 19
- Quick buttons 19
- Status leds 20
- The status leds show whether the cpu memory graphics card and operating system are working properly after system power on if the cpu dram vga led is on that means the corresponding device is not working normally if the boot led is on that means you haven t entered the operating system yet 20
- 8 internal connectors 21
- 2 atx_12v_2x4_1 2 jkl atx_12v_2x2 m atx_12v_2x4 m atx 2x2 2x4 12v power 22
- Connectors and 2x12 main power connector 22
- J only for z790 ud ax k only for z790 ud ac 22
- L only for z790 ud m only for z790 d ddr4 22
- The 12v power connector mainly supplies power to the cpu if the 12v power connector is not connected the 12v power connector mainly supplies power to the cpu if the 12v power connector is not connected the computer will not start 22
- To meet expansion requirements it is recommended that a power supply that can withstand high power consumption be used 500w or greater if a power supply is used that does not provide the required power the result can lead to an unstable or unbootable system 22
- With the use of the power connector the power supply can supply enough stable power to all the components on the motherboard before connecting the power connector first make sure the power supply is turned off and all devices are properly installed the power connector possesses a foolproof design connect the power supply cable to the power connector in the correct orientation 22
- 4 cpu_fan sys_fan1 2a 2b fan headers 23
- All fan headers on this motherboard are 4 pin most fan headers possess a foolproof insertion design when connecting a fan cable be sure to connect it in the correct orientation the black connector wire is the ground wire the speed control function requires the use of a fan with fan speed control design for optimum heat dissipation it is recommended that a system fan be installed inside the chassis 23
- Be sure to connect fan cables to the fan headers to prevent your cpu and system from 23
- Overheating overheating may result in damage to the cpu or the system may hang 23
- Sys_fan3_pump system fan water cooling pump header 23
- The fan pump header is 4 pin and possesses a foolproof insertion design most fan headers possess a foolproof insertion design when connecting a fan cable be sure to connect it in the correct orientation the black connector wire is the ground wire the speed control function requires the use of a fan with fan speed control design for optimum heat dissipation it is recommended that a system fan be installed inside the chassis the header also provides speed control for a water cooling pump please navigate to the bios setup page of gigabyte s website and search for smart fan 6 for more information 23
- These fan headers are not configuration jumper blocks do not place a jumper cap on the headers 23
- Before installing the devices be sure to turn off the devices and your computer unplug the power cord from the power outlet to prevent damage to the devices 24
- Connect your rgb led strip to the header the power pin marked with a triangle on the plug of the led strip must be connected to pin 1 12v of this header incorrect connection may lead to the damage of the led strip 24
- Cpu_opt water cooling cpu fan header 24
- For how to turn on off the lights of the led strip please navigate to the unique features page of gigabyte s website 24
- Led_c1 led_c2 rgb led strip headers 24
- The fan header is 4 pin and possesses a foolproof insertion design most fan headers possess a foolproof insertion design when connecting a fan cable be sure to connect it in the correct orientation the black connector wire is the ground wire the speed control function requires the use of a fan with fan speed control design 24
- The headers can be used to connect a standard 5050 rgb led strip 12v g r b with maximum power rating of 2a 12v and maximum length of 2m 24
- Before installing the devices be sure to turn off the devices and your computer unplug the power cord from the power outlet to prevent damage to the devices 25
- Chipset supports raid 0 raid 1 raid 5 and raid 10 please navigate to the configuring a raid set page of gigabyte s website for instructions on configuring a raid array 25
- Connect your addressable led strip to the header the power pin marked with a triangle on the plug of the led strip must be connected to pin 1 of the addressable led strip header incorrect connection may lead to the damage of the led strip 25
- D_led1 d_led2 addressable led strip headers 25
- For how to turn on off the lights of the led strip please navigate to the unique features page of gigabyte s website 25
- No pin 25
- Pin no definition 25
- Sata3 2 3 4 5 6 7 sata 6gb s connectors 25
- The headers can be used to connect a standard 5050 addressable led strip with maximum power rating of 5a 5v and maximum number of 1000 leds 25
- The sata connectors conform to sata 6gb s standard and are compatible with sata 3gb s and sata 1 gb s standard each sata connector supports a single sata device the inte 25
- To enable hot plugging for the sata ports please navigate to the bios setup page of gigabyte s website and search for sata configuration for more information 25
- Follow the steps below to correctly install an m ssd in the m connector step 1 locate the m connector where you will install the m ssd use a screwdriver to unfasten the screw on the heatsink and then remove the heatsink only the m2a_cpu connectors have the heatsink remove the protective film from the thermal pad on the m2a_cpu connector step 2 locate the proper mounting hole for the m ssd to be installed insert the m ssd into the m connector at an angle step 3 press the m ssd down and then use the included screw to secure it in the connector replace the heatsink and secure it to the original hole remove the protective film from the bottom of the heatsink before replacing the heatsink 26
- M pcie x4 ssd m pcie x2 ssd m sata ssd 26
- M2a_cpu a a 26
- M2a_cpu m2p_sb m2q_sb m socket 3 connectors 26
- M2p_sb a a 26
- M2q_sb a a 26
- There are two types of m ssds m sata ssds and m pcie ssds this motherboard only supports m pcie ssds be sure to verify the type of m ssds you want to use please note that an m pcie ssd cannot be used to create a raid set with a sata hard drive please navigate to the configuring a raid set page of gigabyte s website for instructions on configuring a raid array 26
- Types of m ssds supported by each m connector 26
- F_panel front panel header 27
- 5vdual 28
- F_audio front panel audio header 28
- Head phone detection 28
- Head phone l 28
- Head phone r 28
- Mic detection 28
- No pin 28
- Pin no definition 28
- Sense_send 28
- Some chassis provide a front panel audio module that has separated connectors on each wire instead of a single plug for information about connecting the front panel audio module that has different wire assignments please contact the chassis manufacturer 28
- Spdif_o s pdif out header 28
- Spdifo 28
- The front panel audio header supports high definition audio hd you may connect your chassis front panel audio module to this header make sure the wire assignments of the module connector match the pin assignments of the motherboard header incorrect connection between the module connector and the motherboard header will make the device unable to work or even damage it 28
- This header supports s pdif digital output which allows you to connect a s pdif digital audio cable to output digital audio from your motherboard to the supported audio devices for information about connecting the digital audio cable carefully read the manual for your audio devices 28
- Cc1 18 d 29
- D1 18 ssrx2 29
- D1 19 vbus 29
- F_u32 usb 3 gen 1 header 29
- F_u32c usb type 29
- Gnd 14 gnd 29
- Gnd 14 sstx2 29
- Gnd 17 ssrx2 29
- Header with usb 3 gen 2 support 29
- Nc 20 no pin 29
- Pin no definition pin no definition 29
- Rx1 15 rx2 29
- Rx1 16 rx2 29
- Sbu1 19 d 29
- Sbu2 20 cc2 29
- Ssrx1 12 d2 29
- Ssrx1 13 gnd 29
- Sstx1 15 sstx2 29
- Sstx1 16 gnd 29
- The header conforms to usb 3 gen 1 and usb 2 specification and can provide two usb ports for purchasing the optional 3 front panel that provides two usb 3 gen 1 ports please contact the local dealer 29
- The header conforms to usb 3 gen 2 specification and can provide one usb port 29
- Tx1 12 tx2 29
- Tx1 13 tx2 29
- Vbus 11 d2 29
- Vbus 11 vbus 29
- Vbus 17 gnd 29
- Com serial port header 30
- F_usb1 f_usb2 usb 2 1 headers 30
- Prior to installing the usb bracket be sure to turn off your computer and unplug the power cord from the power outlet to prevent damage to the usb bracket 30
- The com header can provide one serial port via an optional com port cable for purchasing the optional com port cable please contact the local dealer 30
- The headers conform to usb 2 1 specification each usb header can provide two usb ports via an optional usb bracket for purchasing the optional usb bracket please contact the local dealer 30
- Add in card 31
- Add in card connectors 31
- Chip select 31
- Data input 31
- Data output 31
- No pin 31
- Pin no definition 31
- Power 3 v 31
- Spi_tpm trusted platform module header 31
- Supports a thunderbol 31
- Thb_c1 thb_c2 thunderbol 31
- The connectors are used to connect to a gigabyte thunderbol 31
- You may connect an spi tpm trusted platform module to this header 31
- Bat battery 32
- Clr_cmos clear cmos jumper 32
- Rst reset jumper 33
- Chapter 3 bios setup 34
- Function keys 35
- Startup screen 35
- 1 operating system installation 36
- Chapter 4 installing the operating system and drivers 36
- 2 drivers installation 37
- 1 configuring a raid set 38
- 1 configuringaraidset 38
- Before you begin please prepare the following items 38
- Chapter 5 appendix 38
- Raid levels 38
- Regulatory notices 39
- United states of america federal communications commission statement 39
- 2 應避免影響附近雷達系統之操作 41
- Approvals for wireless module rtl8821ce 41
- Corporation 41
- European community radio equipment directive compliance statement 41
- Japan wireless statement 5 5 ghz 帯 5 5 ghz 帯 屋内のみの使用 41
- Korea kcc ncc wireless statement 5 25ghz 5 35 ghz 대역을 사용하는 무선 장치는 실내에서만 사용하도록 제한됩니다 41
- Ncc wireless statements 無線設備警告聲明 低功率電波輻射性電機管理辦法 1 取得審驗證明之低功率射頻器材 非經核准 公司 商號或使用者均不得擅自變更頻率 加大功率或變更原設計之特 性及功能 低功率射頻器材之使用不得影響飛航安全及干擾合法通信 經發現有干擾現象時 應立即停用 並改善至 無干擾時方得繼續使用 前述合法通信 指依電信管理法規定作業之無線電通信 低功率射頻器材須忍受合法通信或 工業 科學及醫療用電波輻射性電機設備之干擾 41
- This equipment complies with all the requirements and other relevant provisions of radio equipment directive 2014 53 eu this equipment is suitable for home and office use in all the european community member states and efta member states the low band 5 5 5 5 ghz is for indoor use only 41
- Wireless module approvals wireless module manufacturer intel 41
- Wireless module model name ax210ngw 41
- Contact us 42
- Gigabyte esupport 42
- To submit a technical or non technical sales marketing question please link to https esupport gigabyte com 42
Похожие устройства
- Gigabyte Z790 UD AC Руководство пользователя по BIOS
- Gigabyte Z790 UD AC Инструкция по эксплуатации
- Gigabyte Z790 GAMING X Руководство пользователя по BIOS
- Gigabyte Z790 GAMING X Инструкция по эксплуатации
- Gigabyte Z790 GAMING X AX Руководство пользователя по BIOS
- Gigabyte Z790 GAMING X AX Инструкция по эксплуатации
- Gigabyte Z790M AORUS ELITE Руководство пользователя по BIOS
- Gigabyte Z790M AORUS ELITE Инструкция по эксплуатации
- Gigabyte Z790M AORUS ELITE AX Руководство пользователя по BIOS
- Gigabyte Z790M AORUS ELITE AX Инструкция по эксплуатации
- Gigabyte B760 AORUS ELITE Руководство пользователя по BIOS
- Gigabyte B760 AORUS ELITE Инструкция по эксплуатации
- Gigabyte B760 AORUS ELITE AX Руководство пользователя по BIOS
- Gigabyte B760 AORUS ELITE AX Инструкция по эксплуатации
- Gigabyte B760 AORUS ELITE DDR4 Руководство пользователя по BIOS
- Gigabyte B760 AORUS ELITE DDR4 Инструкция по эксплуатации
- Gigabyte B760 AORUS ELITE AX DDR4 Руководство пользователя по BIOS
- Gigabyte B760 AORUS ELITE AX DDR4 Инструкция по эксплуатации
- Gigabyte B760 AORUS MASTER DDR4 Руководство пользователя по BIOS
- Gigabyte B760 AORUS MASTER DDR4 Инструкция по эксплуатации