Gigabyte Z690 UD [18/28] Rc6 render standby

- 18 -

& ErP

Determines whether to let the system consume least power in S5 (shutdown) state.

Note: When this item is set to Enabled, the Resume by Alarm function becomes unavailable.

& Soft-Off by PWR-BTTN

Congures the way to turn off the computer in MS-DOS mode using the power button.

Instant-Off Press the power button and then the system will be turned off instantly.

Delay 4 Sec. Press and hold the power button for 4 seconds to turn off the system. If the power

button is pressed for less than 4 seconds, the system will enter suspend mode.

& Resume by Alarm

Determines whether to power on the system at a desired time.

If enabled, set the date and time as following:

Wake up day: Turn on the system at a specic time on each day or on a specic day in a month.

Wake up hour/minute/second: Set the time at which the system will be powered on automatically.

Note: When using this function, avoid inadequate shutdown from the operating system or removal of the

AC power, or the settings may not be effective.

& Power Loading

Enables or disables dummy load. When the power supply is at low load, a self-protection will activate causing

it to shutdown or fail. If this occurs, please set to Enabled. Auto lets the BIOS automatically congure this

setting.

& RC6(Render Standby)

(Note)

Allows you to determine whether to let the onboard graphics enter standby mode to decrease power

consumption.

& AC BACK

Determines the state of the system after the return of power from an AC power loss.

Memory The system returns to its last known awake state upon the return of the AC power.

Always On The system is turned on upon the return of the AC power.

Always Off The system stays off upon the return of the AC power.

(Note) This item is available only when you install a CPU that supports this feature.