Makita DFJ207ZL [10/72] Functional description
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Makita DFJ207ZL [10/72] Functional description

Makita DFJ207Z2XL [10/72] Functional description
10 ENGLISH
FUNCTIONAL
DESCRIPTION
NOTICE: The fan jacket is effective when the
humidity and temperature of intake air are lower
than those of the body surface. The fan jacket
may not be effective if the air temperature and/or
humidity are higher than those inside the jacket.
Power button
Toturnonthejacket,pressandholdthepowerbutton
onthebatteryholder(optionalaccessory).Thejacket
starts at high air speed. Each time you tap the power
button, the air speed changes from high to medium,
medium to low, and low to high. The air speed indicator
shows the current air speed.
►Fig.12: 1. Air speed indicator 2. Power button
To turn off, press and hold the power button again.
Indicating the remaining battery
capacity
Only for battery cartridges with the indicator
►Fig.13: 1. Indicator lamps 2. Check button
Press the check button on the battery cartridge to indi-
cate the remaining battery capacity. The indicator lamps
light up for few seconds.
Indicator lamps Remaining
capacity
Lighted Off Blinking
75% to 100%
50% to 75%
25% to 50%
0% to 25%
(For 14.4 V and 18 V batteries only)
Charge the
battery.
(For 14.4 V and 18 V batteries only)
The battery
may have
malfunctioned.
NOTE: Depending on the conditions of use and the
ambient temperature, the indication may differ slightly
from the actual capacity.
Battery protection system
The device is equipped with a battery protection sys-
tem. This system automatically cuts off power to the
motor to extend battery life.
If the remaining battery capacity is too low, the device
will not operate. When you turn the device on, the motor
will run again, but stops soon. In this situation, remove
and recharge the battery cartridge.
Turbo button
By pressing turbo button on the battery holder, the
jacketworksinturbomodeforquickcooling.Turbo
mode lasts for a minute and then air speed returns to
normal.
►Fig.14: 1. Turbo button
Air ow
Tomaintainastableairow,closethebuttonatthe
neckofthejacket.Fastenthebuttonontheribbonfor
betterairowintheback.
►Fig.15: 1. Ribbon
Airowinsidethejacketisshownbelow.
►Fig.16
Forajacketwithahood,wearthehoodoverahelmet.
The air from the fan goes through the helmet and cools
your head.
►Fig.17
Battery pocket
Apocketisprovidedforstoringthe10.8V/10.8V-12
Vmaxbatteryholder(withbattery)insidethejacket.
Connect the power cable to the battery holder, and then
put it into the pocket and fasten the snap buttons.
►Fig.18
Mesh pocket
Meshpocketsareprovidedonthebackofthejacketfor
storing ice packs.
►Fig.19: 1. Mesh pocket
Connecting USB devices
CAUTION: Connect only devices that are
compatible with the USB power supply port. Not
doing so may cause a malfunction of the battery
holder.
NOTICE: Before connecting a USB device to
the battery holder (with the battery), always back
up the data on the USB device. Not doing so may
cause a loss of your data.
The battery holder (with the battery) can work as an
external power supply for USB devices.
Open the cover and connect a USB cable (not included)
to the power supply port of the battery holder. Then con-
nect the other end of the cable to the device and turn on
the switch next to the USB port.
►Fig.20: 1. Cover 2. Switch

Содержание

Похожие устройства

Скачать