STATUS MX1600CE — руководство по безопасному использованию электроинструментов [2/18]

Превью страниц Страница 2 / 18

1. INTENDED USE

2. SAFETY ADVICE

INTENDED USE

SAFETY ADVICE

WARNING!

Read all instructions carefully. Failure to follow all instructions listed below may

result in electric shock, ﬁre and/or serious injury.

SAVE THESE INSTRUCTIONS

1) WORK AREA

• Keep work area clean and well lit.

Cluttered and dark areas incite accidents.

• Do not operate power tools in explosive atmospheres, such as in the presence

of ﬂammable liquids, gases or dust.

Power tools create sparks which may ignite the dust or fumes.

• Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

2) ELECTRICAL SAFETY

• Power tool plugs must match the outlet. Never modify the plug in any way.

Do not use any adapter plugs with earthed (grounded) power tools.

Unmodiﬁed plugs and matching outlets will reduce risk of electric shock.

• Avoid body contact with earthed or grounded surfaces such as pipes, radiators,

ranges and refrigerators. There is an increased risk of electric shock if your

body is earthed or grounded.

• Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of electric shock.

• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging

the power tool. Keep cord away from heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk of electric shock.

• When operating a power tool outdoors, use an extension cord suitable for

outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric

shock.

• Connect the electric power tool to electricity, using a 16/25 A maximum secure

contact protected outlet (220/240V~, 50/60 Hz). We recommend you to attach

a residual current circuit-breaker (RCD) that does not exceed 30mA.

MX1600CE

• Hold the power tool by insulated gripping surfaces only, when performing an ope-

ration where the cutting accessory may contact hidden wiring or its own cord.

Cutting accessory contacting a "live" wire may make exposed metal parts of the

power tool "live" and could give the operator an electric shock.