HYUNDAI ELECTRONICS H-CDM8066 [3/37] Important safeguards

Important safeguards

· Read carefully through this manual to familiarize yourself with this high-quality sound system.

· Disconnect the vehicle's negative battery terminal while mounting and connecting the unit.

· When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a higher

amperage rating may cause serious damage to the unit.

· DO NOT attempt to disassemble the unit. Laser beams from the optical pickup are dangerous to the eyes.

· Make sure that pins or other foreign objects do not get inside the unit; they may cause malfunctions, or create

safety hazards such as electrical shock or laser beam exposure.

· If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes

normal before operating the unit.

· DO NOT open covers and do not repair yourself. Consult the dealer or an experienced technician for help.

· Make sure you disconnect the power supply and aerial if you will not be using the system for a long period or

during a thunderstorm.

· Make sure you disconnect the power supply if the system appears to be working incorrectly, is making an

unusual sound, has a strange smell, has smoke emitting from it or liquids have got inside it. Have a qualified

technician check the system.

· The unit is designed for negative terminal of the battery, which is connected to the vehicle metal. Please confirm

it before installation.

· Do not allow the speaker wires to be shorted together when the unit is switched on. Otherwise it may overload or

burn out the power amplifier.

· Do not install the detachable panel before connecting the wire.

Remark:

· In addition to normal audio CD, this unit can play CD-R and CD-R/W disc that contain audio tracks as well;

however, depending on the conditions of the recording equipment, recording program or the CD-R as well as

CD-R/W disc itself, some CD-R or CD-R/W may not play.

· When making music CD with CD-R or CD-R/W disc, too high recording speed may result in poor signal quality

and therefore, it is recommend- able to select 24x or lower speed for CD-R recording and 4x or lower speed for

CD-R/W recording.