JVC KD-X141M [12/52] Audio settings
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

JVC KD-X141M [12/52] Audio settings

JVC KD-X141M [12/52] Audio settings
ENGLISH
10
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
AUDIO SETTINGS
LOUDNESS LEVEL 01
/
LEVEL 02
:Boosts low or high frequencies to produce a well-
balanced sound at low volume.;
OFF
:Cancels.
SUB.W LEVEL
*
1
SPK-OUT
*
2
SUB.W 00
to
SUB.W +06
(
SUB.W +03
):Adjusts the
output level of the subwoofer connected via speaker lead.
(
16)
PRE-OUT
*
3
SUB.W –08
to
SUB.W +08
(
SUB.W 00
):Adjusts the
output level of the subwoofer connected to the lineout
terminals (REAR/SW) through an external amplifier.
( 16)
SUBWOOFER SET
*
3
ON
: Turns on the subwoofer output.;
OFF
: Cancels.
SUBWOOFER
LPF
*
1
FRQ THROUGH
:All signals are sent to the subwoofer;
FRQ 55HZ
/
FRQ 85HZ
/
FRQ 120HZ
:Audio signals with frequencies lower
than 55Hz/85Hz/120Hz are sent to the subwoofer.
SUB.W PHASE
*
1
*
4
REVERSE
(180°)/
NORMAL
(0°):Selects the phase of the subwoofer output
to be in line with the speaker output for optimum performance.
FADER POSITION R06
to
POSITION F06
(
POSITION 00
):Adjusts the front and
rear speaker output balance.
BALANCE
*
5
POSITION L06
to
POSITION R06
(
POSITION 00
):Adjusts the left and
right speaker output balance.
VOLUME
ADJUST LEVEL –15
to
LEVEL +06
(
LEVEL 00
):Preset the initial volume level of
each source (compared to the FM volume level). Before adjustment, select
the source you want to adjust. (“VOLADJFIX” appears if FM is selected.)
AMP
GAIN LOW POWER
:Limits the maximum volume level to 25. (Select if the
maximum power of each speaker is less than 50W to prevent damaging
the speakers.);
HIGH POWER
:The maximum volume level is 35.
*
1
Displayed only when
[SUBWOOFER SET]
is set to
[ON]
.
*
2
Displayed only when
[SPK/PRE OUT]
is set to
[SUB.W/SUB.W]
.
*
3
Displayed only when
[SPK/PRE OUT]
is set to
[REAR/SUB.W]
or
[SUB.W/SUB.W]
.
*
4
Selectable only if a setting other than
[FRQ THROUGH]
is selected for
[SUBWOOFER LPF]
.
*
5
This adjustment will not affect the subwoofer output.
D.T.EXPANDER
(Digital Track
Expander)
ON
:Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are lost in
audio data compression.;
OFF
:Cancels.
SPK/PRE OUT
Depending on the speaker connection method, select the appropriate
setting to get the desired output. (
Speaker output settings
)
Speaker output settings
Select the output setting for the speakers
[SPK/PRE OUT]
, base on the
speaker connection method.
Connection via lineout terminals
For connections through an external amplifier.
( 16)
Setting on
[SPK/PRE OUT]
Audio signal through lineout terminal
FRONT REAR/SW
REAR/REAR
Front speakers output Rear speakers output
REAR/SUB.W
(default) Front speakers output Subwoofer output
SUB.W/SUB.W
Front speakers output Subwoofer output
Connection via speaker leads
For connections without using an external amplifier. However, with
this settings you can also enjoy the subwoofer output.
( 16)
Setting on
[SPK/PRE OUT]
Audio signal through rear speaker lead
L (left) R (right)
REAR/REAR
Rear speakers output Rear speakers output
REAR/SUB.W
Rear speakers output Rear speakers output
SUB.W/SUB.W
Subwoofer output (Mute)
If
[SUB.W/SUB.W]
is selected:
–
[FRQ 120HZ]
is selected in
[SUBWOOFER LPF]
and
[FRQ THROUGH]
is not
available.
–
[POSITION R01]
is selected in
[FADER]
and selectable range is
[POSITION R06]
to
[POSITION 00]
.
JS_JVC_KD-X141M_M2_1.indd 10JS_JVC_KD-X141M_M2_1.indd 10 9/15/2016 10:32:17 AM9/15/2016 10:32:17 AM

Содержание

Похожие устройства

Скачать