HYUNDAI ELECTRONICS H-ALС3-60H [12/44] Maintenance
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

HYUNDAI ELECTRONICS H-ALС3-60H [12/44] Maintenance

HYUNDAI ELECTRONICS H-ALС3-60H [12/44] Maintenance
12
Electric air conditioner (split system)
EN
8. MAINTENANCE
Before cleaning switch the conditioner o.
Cleaning of the indoor unit and remote control board:
• Indoor unit and remote control board should be cleaned with a dry so cloth.
• If the indoor unit is too unclean, moisten the cloth with cold water.
• It is prohibited to clean the remote control board with moist cloth.
• In order to avoid the damage of paint or details of the conditioner, do not
clean it with brushes and do not leave them on the surface of indoor unit.
• In order to avoid the damage of surface or deformation of the conditioner
details, do not clean it with petrol, solvents, cleaning powders or other
chemically active substances.
Before a sustained interruption in the conditioner work:
• Turn the conditioner on for several hours in the FAN mode. It will allow you
to dry its inner cavities
• Switch the conditioner o.
• Remove the batteries from the remote control board.
Checks before starting:
• Make sure that an air lter is installed.
• Make sure that air inlet and return air grillages of the outdoor unit are not
blocked by foreign objects.
Cleaning of air lter:
• Air lter cleans the air entering the conditioner from dust and foreign
particles. If the lter is contaminated, the conditioner capacity decreases
sharply. If the conditioner is operated permanently, the lter should be
cleaned once per two weeks.
• If the conditioner is installed in a room with dusty atmosphere, then the air
lter should be cleaned more oen.
• To remove the lter, open the air inlet of the indoor unit panel. Press the
locks to the center and pull the grillages down. Remove the air inlet. Re-
move the air lter. Clean the lter with a vacuum cleaner or rinse it in clean
water. If the lter is contaminated heavily, clean it with a so brush and
wash in diluted washing solution, then dry it in a cool place.
• While cleaning the lter with the vacuum cleaner, hold it with contaminated
surface up. While washing the lter in water, hold it with contaminated
surface down.
• Do not dry the lter in the sun or near a re.
• Set the air lter to initial position and close an air inlet cover.
9. RECYCLING, LIFETIME, WARRANTY PERIOD
Aer the lifetime of the device expires, it should be recycled in compliance
with the laws, rules and methods in region of recycling. Detailed information
about the recycling of the device, you can receive from a representative of
the local government, aer providing him full information about the device.
The manufacturer and authorized person of the manufacturer do not carry
responsibility for the fulllment by the Buyer of the requirements of egis-

Содержание

Похожие устройства

Скачать