HYUNDAI ELECTRONICS H-ARI22-12H [10/40] Maintenance

Electric air conditioner (split system)

Drying operation mode

1. Press the «MODE» button, select the drying operation mode.

2. Press the «ON/OFF» button, the air-conditioner starts to operate.

3. Press the «ON/OFF» button again, the air-conditioner stops.

Backlight function (for remote controllers with such function only)

The remote controller has a backlight which can be turned on by pressing

any button for the convenience of operation in darkness. The backlight will be

automatically turned o if there is no operation within 10 seconds.

8. MAINTENANCE

Before cleaning unplug the conditioner.

Cleaning of the indoor unit and remote control board:

• Indoor unit and remote control board should be cleaned with a dry so cloth.

• If the indoor unit is too unclean, moisten the cloth with cold water.

• In order to avoid the damage of paint or details of the conditioner, do not

clean it with brushes and do not leave them on the surface of indoor unit.

• In order to avoid the damage of surface or deformation of the conditioner

details, do not clean it with petrol, solvents, cleaning powders or other

chemically active substances.

Before a sustained interruption in the conditioner work:

• Turn the conditioner on for several hours in the FAN mode. It will allow you

to dry its inner cavities.

• Unplug the conditioner.

• Remove the batteries from the remote control board.

Cheks before starting:

• Make sure that an air lter is installed.

• Make sure that air inlet and outlet grilles of the outdoor unit are not

blocked by foreign objects.

Cleaning of air lter.

• Air lter cleans the air entering the conditioner from dust and foreign particles.

If the lter is contaminated, the conditioner capacity decreases sharply.

• If the conditioner is operated permanently, the lter should be cleaned

once per two weeks.

• If the conditioner is installed in a room with dusty atmosphere, then the air

lter should be cleaned more oen.

• To remove the lter, open the indoor unit panel.

• Remove air lters. Clean the lter with a vacuum cleaner or rinse it in clean

water. If the lter is contaminated heavily, clean it with a so brush and

wash in diluted washing solution, then dry it in a cool place.