Philips DS8500 [5/20] Notice

Important notes for users in the U.K.

Mains plug

Thisapparatusisttedwithanapproved13Ampplug.Tochangeafusein

this type of plug proceed as follows:

1 Remove fuse cover and fuse.

2 Fix new fuse which should be a BS1362 3 Amp, A.S.T.A. or BSI approved type.

3 Retthefusecover.

Ifthettedplugisnotsuitableforyoursocketoutlets,itshouldbecutoff

andanappropriateplugttedinitsplace.Ifthemainsplugcontainsafuse,

this should have a value of 3 Amp. If a plug without a fuse is used, the fuse

at the distribution board should not be greater than 5 Amp.

Note: The severed plug must be disposed of to avoid a possible shock

hazard should it be inserted into a 13 Amp socket elsewhere.

How to connect a plug

The wires in the mains lead are coloured with the following code: blue =

neutral (N), brown = live (L).

As these colours may not correspond with the colour markings

•

identifying the terminals in your plug, proceed as follows:

Connect the blue wire to the terminal marked N or coloured black.

•

Connect the brown wire to the terminal marked L or coloured red.

•

Do not connect either wire to the earth terminal in the plug, marked E

•

(or e) or coloured green (or green and yellow).

Before replacing the plug cover, make certain that the cord grip is clamped

over the sheath of the lead - not simply over the two wires.

Recording and playback of material may require consent. See Copyright

Act 1956 and The Performers’s Protection Acts 1958 to 1972.

Notice

Anychangesormodicationsmadetothisdevicethatarenotexpressly

approved by Philips Consumer Lifestyle may void the user’s authority to

operate the equipment.

DS8500_05_UM_V1.2.indd 5 2/4/2010 10:52:47 AM