Harman/Kardon SB 26 [12/15] Programming sb26 to respond to your tv remote

SB26

Programming SB26 to Respond to Your TV Remote

You can program the SB26 to make it respond to your TV remote’s power, mute, volume

up and volume down commands. This programming lets you control power and volume

functions of your SB26 soundbar with your TV remote. Before beginning to program

the SB26, have your TV remote in hand. We recommend sitting down in front of

the soundbar.

NOTE: Some steps will time out, so read through this entire process before

you begin.

Have the TV remote in hand. When you start programming the remote, be ready to

aim the TV remote to the front of the soundbar from about 300 mm – 900 mm

(about 12 – 36 inches) away.

To program the power, surround, volume down, volume up and mute commands:

1. Ensure that the SB26 is ON.

2. On the soundbar, press and hold the soundbar’s Surround button

until the visible Surround button flashes amber. If the button does

not flash after three seconds, release the buttons and try again.

Hold down the button until the

surround button indicator ﬂashes

3. You have to press the soundbar button that you want to program (Power,

Volume Down, Volume Up, Volume Down and Up simultaneously for Mute).

4. You have to aim the TV remote at the front of the soundbar and

slowly press the corresponding button on the remote until the

Surround button on the soundbar flashes white for one second. This

indicates that the programming operation has been successful.

5. To exit the learning mode (at any time or when the learning

is complete), press and hold the soundbar surround button

until the amber illumination stops flashing.

NOTE: If you would like to program a new TV remote control or you are

missing a command, restart the whole process.

If you would like to cancel the learning, reset the SB26. Put the SB26 in Standby mode,

press and hold the Surround and Volume – button simultaneously. Once factory

defaults are restored, the SB26 surround button will flash white for one second, then

the unit will enter into operational mode.

Momentarily press the button

you want to program

Tv Remote

30 mm (12’’)