Harman/Kardon HKAURAAPBLKEU [6/12] Operation

Aura

Operation

To connect using the Harman Kardon remote app:

1. Go to the Apple App store or Google Play store and down-

load the Harman Kardon Remote app.

2. Click + icon on the home screen to add a new device to your

network and choose Harman Kardon Aura from the list.

3. Follow the setup instructions in the app.

Ad-hoc Mode

If you have a Mac or PC computer, or other phone or tablet, use the following method

to connect to the system:

1. Put the Harman Kardon Aura into Ad-hoc mode by touching the

Wi-Fi button for more than 5 seconds (ensure there are no USB de-

vices plugged into the USB port). The Wi-Fi LED will flash twice.

2. Go to the Wi-Fi Settings page on your Mac, PC or Phone and

connect to the network with the name HK_Aura*****.

This may take around 40 seconds depending on your device.

3. Open your web browser and enter the IP address as

192.168.1.1 in the address bar of your browser.

4. Select the name of the Wi-Fi network you want

to connect from the drop-down menu.

5. Enter the password for your network and click Save.

6. Ensure that you have entered the password correctly. If you are

not sure, enter the password again without any mistake.

The Harman Kardon Aura will then attempt to connect to your Wi-Fi network. This may

take up to one minute depending on your Wi-Fi router. If the connection is successful,

the Wi-Fi LED will turn green and the connection successful tone can be heard. If the

connection is unsuccessful or your password incorrect, the Wi-Fi LED will flash quickly.

To try again, start from step 1.

NOTE: To restore the factory default settings, long press Source and Power

button in Operational mode.

Operation

Switching to Different Power Modes

The power button on the side panel of the HK Aura allows you to set the wireless

speaker to any of the following power modes:

• Operational mode

• Sleep mode

• Standby mode

• Off mode

To change the power modes:

• Press the power button to enter into Operational mode from Standby mode.

• Press the power button again if you want to make the system enter into

Standby mode from Operational mode.