Philips FC6055_01 [7/152] English

Only charge the vacuum cleaner with the adapter and charging unit

supplied. During charging, the adapter will feel warm to the touch.

This is normal.

Do not hold the appliance with the dust compartment pointing

upwards and do not tilt the appliance to one side when sucking up



Always switch the vacuum cleaner off after use.

Keep the appliance out of the reach of children.

The voltage on the contact strips in the charging unit is low (max.

12 volts) and therefore not dangerous.

Never block the exhaust air openings during vacuuming.

Switch the appliance off when recharging it.



dry the dust compartment before storing the appliance in the

charging unit.

To avoid the risk of electric shock, be careful when drilling holes in

the wall to attach the charging unit, especially close to a wall socket.

Noise level: Lc = 80 dB [A]

Preparing for use

Installing the charging unit

1 You can attach the charging unit to the wall as indicated in the



If you attach the charging unit to the wall, the space between the screw

holes should be 70 mm.

2 You can also place the charging unit on a horizontal surface (e.g. a

table or desk). (Fig. 3)

3 Excess mains cord can be wound round the charging unit. (Fig. 4)

Charging the appliance



time.

1 Insert the adapter into the wall socket.

ENGLISH 7