Philips FC8134 [7/124] English

- Children should be supervised to ensure that they do not play with the appliance.

- Do not point the hose, the tube or any other accessory at the eyes or ears nor put it in your

mouth when it is connected to the vacuum cleaner and the vacuum cleaner is switched on.

- Do not use the appliance and the mini turbo brush on pets.

- The plug must be removed from the socket-outlet before cleaning or maintaining the appliance.

Caution

- Do not suck up large objects as this may cause the air passage in the tube or hose to become

obstructed.

- When you use the vacuum cleaner to vacuum ashes, fine sand, lime, cement dust and similar

substances, the pores of the dustbag and the motor protection filter become clogged. If you

notice a strong decrease in suction power, replace the dustbag and clean the motor protection

filter.

- Always unplug the appliance before you replace the dustbag or clean the filters and assemble or

disassemble accessories.

- Never use the appliance without a dustbag or the motor protection filter. This could damage the

motor and shorten the life of the appliance. We advise you to use Philips s-bag

dustbags or

Philips reusable dustbags.

- Noise level: Lc= 81 dB(A)

Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled

properly and according to the instructions in this user manual, the appliance is safe to use based on

scientific evidence available today.

Preparing for use

Hose

1 To connect the hose, push it into the appliance (‘click’) (Fig. 2).

2 To disconnect the hose, press the release buttons (1) and pull the hose connector out of the

hose connection opening (2). (Fig. 3)



1 To connect the tube to the handgrip of the hose, insert the narrow section into the wider

section while turning a little (Fig. 4).

To disconnect the tube, pull while turning a little.

2 Adjust the telescopic tube to the length you find most comfortable during vacuuming. Press

the slide on the tube (1) and push the lower tube part downwards or pull it upwards

(2) (Fig. 5).



You can use the combination nozzle on carpet (with the brush strips folded in) or on hard floors

(with the brush strips folded out).

- To clean hard floors, push the rocker switch on top of the combination nozzle with your foot to

make the brush strips come out of the nozzle housing. (Fig. 6)

- To clean carpet, push the rocker switch on the other side to make the brush strips disappear

into the housing. (Fig. 7)

ENGLISH 7