Philips SRU520 [5/76] Instructions for use

Instructions for use

English

3 Check whether all the keys are working.

For an overview of the keys and their

functions see ‘3. Keys and functions’.

– If the TV responds as it should to all of the

key commands the SRU520 is ready for use.

• If the device does not respond at all or not to all of the

key commands, follow the instructions under

‘Setting the remote control’, or for online setup go to:

www.philips.com/urc.

Setting the remote control

This is only necessary if your device does not respond to the SRU520.

If that is the case, the SRU520 does not recognize the brand and/or model of

your device and you need to program the remote control to do so.

The example below (TV) instructs you how to do this.You can repeat the

same steps for other devices (VCR/DVD players/recorders) which you want

to operate using the SRU520.

You can set the remote control either automatically or manually.

Automatically setting the remote control

The remote control will now automatically search for the right code for your

device.

Example of TV:

1 Make sure the TV is switched on and select a channel using the original

remote control or the keys on the TV (for example channel 1).

The SRU520 emits the ‘switch off TV’ signal for all models of TV that are

stored in the memory.

• If the device is a DVD-player or video recorder, insert a disk or tape

and start playback.

2 Press the TV key to select TV. Press the key

until it lights up.

3 Then keep keys 1 and 3 on the

SRU520 pressed simultaneously for three

seconds, until the key flashes twice and then

remains lit.

4 Press and hold the Standby key

of the SRU520.

– The SRU520 now starts emitting all known

‘TV off’ signals, one by one.

Each time a code is sent, the TV key lights up.

SRU520_87_v6.qxd 26-04-2005 14:38 Pagina 5