Sencor SWD 110 Инструкция по эксплуатации онлайн [3/4] 90196

Doorbell button:
The doorbell button has a slit at the bottom. Here, insert a suitable at-bladed
screwdriver and carefully remove the cover. Now insert the battery ensuring
correct polarity. When attaching the cover, check that the seal is correctly
seated. Otherwise there is a risk that water could damage the electronics.
A blue LED diode is located on the doorbell button and lights up when the
doorbell button is pressed.
Installing the doorbell button
The doorbell button can be permanently installed using screws or glued to a
smooth surface using the supplied sticker. When installing the doorbell button
outdoors, locate it in such a location where it will not be permanently rained
on. Suitable is a recess in a pole or a similar location. Never locate it inside a
metal cover.
Pre-marked screw holes are located on the inside of the cover. These can be
used if you wish to permanently install the doorbell button. It is necessary to
seal the holes under the screw head so that water does not enter through them.
Note:
Always check that you have good signal reception from your chosen location.
Every structural obstacle reduces the eective range between the doorbell and
the doorbell button.
Troubleshooting
The doorbell may be out of the radio signal range - change the distance
between the doorbell and the doorbell button, the range may be aected by
local conditions.
The indicator light does not turn on when the doorbell button is pressed -
replace the battery and ensure the correct polarity of the inserted battery.
The bell has no power supply - check the connection to the power socket
Safety notices, maintenance and cleaning
For safety reasons and for reason of CE registration, do not tamper with the
doorbell or the doorbell button.
Have repairs performed by a qualied technician. Do not expose this product to
excessive humidity, do not dip it in water, do not expose it to vibrations, shocks
and direct sunlight. This product and its accessories are not children’s toys and
do not belong in the hands of children! Do not leave the packaging materials
lying around. Plastic foils present a great danger for children as children could
swallow them.
The wireless doorbell and the doorbell button do not require any maintenance.
To clean the housing only use a soft damp cloth. Do not use any abrasive agents
or chemical solvents (paint and varnish thinners) as these agents could damage
the display and housing of the product.
The doorbell button and the doorbell are uniquely coded in production and in
the event of loss or damage they cannot be replaced
The doorbell is designed for indoor use only. Regularly check that the button
works and replace batteries in time. Only use quality alkaline batteries with the
prescribed parameters. Never install the doorbell button on metal materials
and doors and windows containing metal frames. Also, do not install near
electrical appliances and in locations where there are electrical power lines.
If the doorbell and the doorbell button will not be used for an extended period
of time, take out the batteries.
Do not expose the doorbell and the doorbell button to excessive vibrations
and shocks.
Скачать